1. Manuals
  2. Brands
  3. Hagie Manuals
  4. Farm Equipment
  5. NTB Series
  6. Manual

Hagie NTB Series Manual

Hide thumbs Also See for NTB Series:
Table of Contents

Advertisement

Quick Links

Download this manual
A Word From Hagie Manufacturing Company ................................................................................ 1-1
About This Manual ........................................................................................................................... 1-1
Safety Messages Used In This Manual ............................................................................................. 1-2
Service and Assistance ...................................................................................................................... 1-2
Specifications .................................................................................................................................... 1-3
2014 Product Warranty ..................................................................................................................... 1-7
Safety Precautions ............................................................................................................................. 2-1
Safety Decals .................................................................................................................................... 2-3
Machine Display Warning Messages - 60' NTB .............................................................................. 3-1
Unfold/Fold Procedure - 30'/40' NTB ............................................................................................. 3-2
Unfold/Fold Procedure - 60' NTB .................................................................................................... 3-6
Float Operation - 30'/40' NTB ....................................................................................................... 3-13
Float Operation - 60' NTB .............................................................................................................. 3-16
Application ...................................................................................................................................... 3-19
Service - Lubrication ........................................................................................................................ 4-1
Storage .............................................................................................................................................. 4-5
Transporting ...................................................................................................................................... 5-1
Quick-Tach System ........................................................................................................................... 5-1
Cradle Installation - 60' NTB ........................................................................................................... 5-8
Covers Machine Serial Numbers: SNU80011413001-100, SNU80021413001-100
SNU80031413001-100, SNU80041413001-100, SNU80061413001-100
© 2013-14 Hagie Manufacturing Company. Clarion, Iowa USA

TABLE OF CONTENTS

Part No. 493589
Rev. 1405140331

Advertisement

Table of Contents
loading

Related Manuals for Hagie NTB Series

Summary of Contents for Hagie NTB Series

  • Page 1: Table Of Contents

    TABLE OF CONTENTS 1 – INTRODUCTION A Word From Hagie Manufacturing Company ................1-1 About This Manual ........................... 1-1 Safety Messages Used In This Manual ..................... 1-2 Service and Assistance ........................1-2 Specifications ............................ 1-3 2014 Product Warranty ........................1-7 2 –...

  • Page 2: Introduction

    NTB without obligation to existing units. NOTE: Hagie Manufacturing Company reserves Thank you for choosing a Hagie NTB and we the right to make changes to any current ensure you of our continued interest in its patents or patents pending at any time, satisfactory operation for you.

  • Page 3: Safety Messages Used In This Manual

    NOTE: A “Note” is intended to make special If you do not understand any part of this mention of, or remark on. manual or require additional information or service, contact Hagie Customer Support for SERVICE AND ASSISTANCE assistance. For service and assistance, please contact:...

  • Page 4: Specifications

    INTRODUCTION SPECIFICATIONS Hagie Manufacturing Company offers it’s Nitrogen Toolbar (NTB) in 12-row, 16-row, 18-skip row, 24-skip row, and 36-skip row configurations, depending on model. The 6-ft. (182 cm) clearance allows growers to side-dress nitrogen later in the growing season, in some situations, after tassels have topped.
  • Page 5 SECTION 1 – INTRODUCTION Fold Points (40-ft. NTB) Fold Points (60-ft. NTB) • LH Fold • RH Tip • • LH Tip RH Fold Point Fold Fold Fold Point Point LH Fold Point 40-ft. NTB Fold Points 60-ft. NTB Fold Points -Typical View (Folded position shown) -Typical View...
  • Page 6 SECTION 1 – INTRODUCTION NTB Transport Dimensions 40-ft. NTB Dimensions 30-ft. NTB Dimensions 40’ NTB (Complete unfolded width) * 449.5” (11.4 m) 30’ NTB (Complete unfolded width) * 349” (886.5 cm) 40’NTB (Length - front of machine to front of folded NTB) * 178.3”...
  • Page 7 SECTION 1 – INTRODUCTION 60-ft. NTB Dimensions 60’ NTB • A - NTB Height (raised position) = 137” (348 cm) • B - Length (front of cab to front of folded NTB) = 98.3” (249.7 cm) 60’ NTB • C - Length (overall NTB) (Complete folded width) = 29’-10”...

  • Page 8: 2014 Product Warranty

    Hagie Manufacturing Company within thirty (30) days of the date that such defect or improper workmanship is discovered, or should have been discovered. Labor to repair said items will be covered by standard labor time rates.

  • Page 9: Safety And Precautions

    Wear safety Do not operate the attachment for anything equipment that is appropriate for the job. other than its intended use. Hagie Manufacturing Company shall not be liable for any damage, injury, or death associated with improper use of the attachment.
  • Page 10 SECTION 2 – SAFETY AND PRECAUTIONS heat goes beyond the immediate flame area. General Repair/Maintenance Oil-Over-Air Scenarios Safety • Upon initial startup of the NTB, be ready • Turn off sprayer engine before checking, for possible rapid movement, should adjusting, repairing, lubricating, or some air become trapped in the cylin- cleaning any part of the attachment.

  • Page 11: Safety Decals

    Replace them if they are damaged or missing. All safety decals, instructional decals, or machine striping may be purchased through the Hagie Customer Support Department. To replace safety decals, ensure the installation area is clean and dry and decide on exact position before you remove the backing paper.
  • Page 12 SECTION 2 – SAFETY AND PRECAUTIONS 650339 650201 (Located on left and right front cross- (Located on each outer arm) member near hydraulic manifolds) 650204 (Located between center tool bar and articulator; Located between outrigger and outer arm) 40’ NTB 650137 (Located to the right of the electrical box cover)
  • Page 13 SECTION 2 – SAFETY AND PRECAUTIONS 60’ NTB 650178 (Located near Quick-Attach system) 650208 (Located on Section 3) 650339 650201 (Located on left and right front cross- (Located on Sections 1, 2, and 3; Located member near hydraulic manifolds) on Section 1 articulator) 650204 Section 1 •...
  • Page 14 SECTION 2 – SAFETY AND PRECAUTIONS 650447 (Located to the right of the electrical box cover)

  • Page 15: Operating Your Ntb

    SECTION 3 – OPERATING YOUR NTB After the first warning message has been MACHINE DISPLAY WARNING acknowledged, a second confirmation message MESSAGES - 60’ NTB will appear, which is an assurance confirming that the NTB is unfolded and you want to When operating machine functions, such as proceed.

  • Page 16: Unfold/Fold Procedure - 30'/40' Ntb

    SECTION 3 – OPERATING YOUR NTB • Press ACKNOWLEDGE to accept. AWS Warning Message Float Warning Message After the first warning message has been acknowledged, a second confirmation Refer to “Float Operation - 60’ NTB” message will appear, which is an assurance elsewhere in this manual for further confirming that the NTB is unfolded and you information.
  • Page 17 SECTION 3 – OPERATING YOUR NTB Hydrostatic Drive Control Handle -Typical View Transom Switch - UP 2. Press the Field/Road Button (located on (Located on the Hydrostatic Drive Control Handle) the Machine Display - Home Page) and -Typical View change the machine’s drive state to FIELD mode.
  • Page 18 SECTION 3 – OPERATING YOUR NTB Fold Nitrogen Toolbar • Right Boom • Right Boom UP (to storage position) • Right Boom IN 1. Ensure the Hydrostatic Drive Control • Right Boom Handle is in the NEUTRAL position. • Left Boom UP DOWN •...
  • Page 19 SECTION 3 – OPERATING YOUR NTB NTB Extension - Section 2 (40-ft. NTB only) NOTICE Fold each Section 2 extension IN before folding the tool bar arms in. Failure to comply will result in damage to the NTB during fold procedure. Float Button (Located on the Machine Display - 5.

  • Page 20: Unfold/Fold Procedure - 60' Ntb

    SECTION 3 – OPERATING YOUR NTB UNFOLD/FOLD PROCEDURE - 60’ NTB WARNING Before proceeding, check the area around the machine for bystanders, overhead objects, and power lines. Failure to comply may result in serious injury or death. NOTE: Refer to the “60’ NTB Layout” illustration provided in Section 1 - Introduction elsewhere in this Left and Right Boom/NTB Switches...
  • Page 21 SECTION 3 – OPERATING YOUR NTB Field/Road Button (Located on the Machine Display - Home Page) Gauge Wheel (One located on each side of NTB) NOTE: The machine’s drive state cannot be -Typical View changed unless the Hydrostatic Drive Control Handle is in the NEUTRAL 4.
  • Page 22 SECTION 3 – OPERATING YOUR NTB the Hydrostatic Drive Control Handle) in NOTE: When each outer Section 3 the UP position. attachment is nearing the fully unfolded position, ensure that Section 1 does not interfere with the lock assembly (located on Section 2). 7.
  • Page 23 SECTION 3 – OPERATING YOUR NTB NOTE: The Lock Assembly Switch operates two separate functions. In Road Mode, the switch activates the gauge wheels. In Field Mode, the switch activates the lock assembly. Hydrostatic Drive Control Handle -Typical View Lock Assembly Switch (Located on the side console) 2.
  • Page 24 SECTION 3 – OPERATING YOUR NTB • RIGHT • LEFT Section 3 Section 3 Float Button Section 3 Raise/Lower Switches (Located on the Machine Display - (Located on the side console) Auxiliary Controls Page) -Typical View 4. Raise the NTB up off ground. •...
  • Page 25 SECTION 3 – OPERATING YOUR NTB 8. Fold in the NTB by pressing and holding the corresponding Left and Right Boom/ NTB Switches (located on the Hydro- static Drive Control Handle) in the IN position. Lock Assembly “Disengaged/Unlocked” Lock Assembly Position Shown “Engaged/Locked”...
  • Page 26 SECTION 3 – OPERATING YOUR NTB NOTE: While viewing cradle in mirror, ease 12. Press and hold the Gauge Wheel Switch attachment into cradle by “tapping” (located on the side console) in the UP the Left or Right Boom/NTB Switch - position to raise the gauge wheels.

  • Page 27: Float Operation - 30'/40' Ntb

    SECTION 3 – OPERATING YOUR NTB FLOAT OPERATION - 30’/40’ NOTICE Ensure Float operation is enabled when operating the NTB. Failure to comply may result in property damage. Field/Road Button (Located on the Machine Display Float operation allows the NTB to raise up - Home Page) and down while riding through the field to avoid machine damage due to uneven...
  • Page 28 SECTION 3 – OPERATING YOUR NTB Master Spray Switch Transom Switch - UP (Located on the back side of the (Located on the Hydrostatic Hydrostatic Drive Control Handle) Drive Control Handle) -Typical View -Typical View Set Float to Transom Switch 2.
  • Page 29 SECTION 3 – OPERATING YOUR NTB NTB Adjustments Screen NTB Setup Button (Located on the Machine Display - Settings Page) 4. Press YES to operate Float with the Transom Down Switch, then press OK. 2. On the “NTB Adjustments” screen, press NOTE: Press NO to set Float back to EDIT (next to One Tap Transom Up).

  • Page 30: Float Operation - 60' Ntb

    SECTION 3 – OPERATING YOUR NTB Float operation allows the NTB to raise up and down while riding through the field to avoid machine damage due to uneven ground. Float operation may be activated using various methods. In all options, Float must be enabled through the Machine Display and the machine must be in Field Mode.
  • Page 31 Right Section 2 Maximum In an effort to help make your 60-ft. NTB ride through the field and apply as desired, Hagie Manufacturing Company has designed each up and down function on the tool bar adjustable, due to varying ground conditions and personal preference from one operator to the next.
  • Page 32 SECTION 3 – OPERATING YOUR NTB 60’ NTB Adjustments Screen 60’ NTB Setup Button (Located on the Machine Display - Settings Page) NOTE: Refer to the “60’ NTB Layout” illustration provided in Section 1 - 2. On the “60’ NTB Adjustments” screen, Introduction elsewhere in this press EDIT (next to Section 1 Force manual to aid in identifying the...

  • Page 33: Application

    SECTION 3 – OPERATING YOUR NTB 4. Start the engine. APPLICATION 5. Press the Field/Road Button (located on the Machine Display - Home Page) and change the machine’s drive state to NOTICE FIELD. NOTE: The drive state of the machine cannot be changed unless the Never attempt to operate the spray Hydrostatic Drive Control Handle is...
  • Page 34 SECTION 3 – OPERATING YOUR NTB • Agitation • Main Tank Valve Valve Status Pressure Solution Pump Switch (Located on the side console) Main Tank Valve Status and -Typical View Agitation Valve Pressure Indicators (Located on the Machine Display Home Page - Field Mode) 7.
  • Page 35 SECTION 3 – OPERATING YOUR NTB Boom Solution Valve Switches (Located on the side console) -Typical View Master Spray Switch NOTE: Number of sections available will (Located on the back side of the depend on the number of section Hydrostatic Drive Control Handle) valves equipped on your NTB.

  • Page 36: Maintenance And Storage

    SECTION 4 – MAINTENANCE AND STORAGE SERVICE - LUBRICATION Perform grease point inspection/application as recommended in the following information. Apply ™ grease (such as Mobilgrease XHP 220-Series) as required. NOTICE Failure to properly lubricate pivot and friction points may result in unnecessary wear and damage.
  • Page 37 SECTION 4 – MAINTENANCE AND STORAGE Grease Point C Grease Point B Grease Point A Grease Points (40-ft. NTB shown) -Typical View Grease Point C (Outer Fold) Grease Point A * 40-ft. NTB only (Main Toolbar Fold) Grease Point B (Inside Fold)
  • Page 38 SECTION 4 – MAINTENANCE AND STORAGE Grease Points (Zerks) - 60’ NTB Lubricate the following Grease Points daily/weekly (as required), or as needed. WEEKLY DAILY • 60’ NTB: Twelve (12) Grease Points (A, B, C, D, E, and F) - six (6) per side. NOTE: Lubricate Grease Points A, B, C, and D weekly.
  • Page 39 SECTION 4 – MAINTENANCE AND STORAGE Grease Point B Grease Point A - View 1 (Left-hand side shown) (Left-hand side shown) Grease Point C (Left-hand side shown) Grease Point A - View 2 (Left-hand side shown)

  • Page 40: Storage

    4. Thoroughly wash the attachment and (Left-hand side shown) touch up any chipped or damaged paint. 5. Replace any damaged or missing decals. NOTE: Contact Hagie Customer Support for paint touch-up recommendations and decal replacement. 6. Apply multi-purpose grease to hydraulic cylinder rods.
  • Page 41 SECTION 4 – MAINTENANCE AND STORAGE cal, solution, and foam marker, if equipped) are capped or covered with a suitable covering. Winterization Procedure To winterize the NTB, it is recommended that you use an environmentally safe type of antifreeze and water mixture that will give you adequate protection to -30°.

  • Page 42: Miscellaneous

    TRANSPORTING CAUTION Driving Your Machine with an Attachment Hagie Manufacturing Company does not When driving on a roadway or elsewhere, be recommend any form of transportation aware of any situation where the machine will be other than driving the sprayer. Loading...
  • Page 43 SECTION 5 – MISCELLANEOUS Refer to “Air Suspension Exhaust” provided in your machine operator’s WARNING manual for further information. Turn the engine OFF before connecting/ disconnecting any hoses or electrical lines. Failure to comply may result in serious injury or death. 1.
  • Page 44 SECTION 5 – MISCELLANEOUS Foam Marker Connection -If Equipped Attachment Clearing Mounting Pin -Typical View Foam Marker Connection 6. Raise the machine by pressing the Sus- (Located on front pension Button to the OFF (Inflate) posi- right-hand side of machine) tion.
  • Page 45 SECTION 5 – MISCELLANEOUS • Hydraulic/Electrical Connections • Quick Connect Handle Hydraulic/Electric Multi-Coupler Assembly (Located on front left-hand side of machine) -Typical View 10. Start the engine. 11. Raise the NTB attachment until the Attachment Hooks fully engage. NOTE: Raising the attachment will allow the weight of the NTB to pull the Attachment Hooks over the Mounting Pins.
  • Page 46 SECTION 5 – MISCELLANEOUS NOTICE WARNING Lower NTB to the ground before Ensure NTB attachment is in the fully disengaging the Quick-Tach Lock FOLDED position before detaching from Assemblies. machine. Failure to comply may result in serious injury or death and will result in property damage.
  • Page 47 SECTION 5 – MISCELLANEOUS Suspension Button Attachment Clearing Mounting Pins (Located on the Machine Display - -Typical View Auxiliary Controls Page) 4. Ensure the Boom Solution Valve NOTE: When the Suspension Button is Switches (located on the side console) pressed, a warning message will are in the OFF position.
  • Page 48 NOTE: Install provided covers/caps on disconnection points to avoid damage and contamination. If necessary, cover the opening with a plastic bag (secured with tape). Contact Hagie Customer Support for replacement covers. Foam Marker Connection (Located on front right-hand side of machine)

  • Page 49: Cradle Installation - 60' Ntb

    SECTION 5 – MISCELLANEOUS To Install Cradle 9. Start the engine. 10. Disengage the parking brake and slowly back away from the attachment. NOTICE Ensure securement bolt is properly installed before operating the NTB. Failure to comply may result in property damage.
  • Page 50 SECTION 5 – MISCELLANEOUS Securement Bolt -Typical View 4. Insert Lock Pin into hole opening located on the opposite end of Securement Bolt. NOTE: Ensure the cable is attached to the Lock Pin before installing. Lock Pin -Typical View 5. Perform Steps 1 through 4 on opposite side of machine to install second NTB Cradle.
  • Page 51 Service - Lubrication ........4-1 Service and Assistance ......... 1-2 Specifications ..........1-3 Storage ............4-5 Transporting ..........5-1 Unfold/Fold Procedure - 30’/40’ NTB ..3-2 Unfold/Fold Procedure - 60’ NTB ....3-6 © 2013-14 Hagie Manufacturing Company. Clarion, Iowa USA...

Table of Contents