Safety Instructions - Omnitronic UHF-502 User Manual

2

SAFETY INSTRUCTIONS

Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires!
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems.
Unpacking
Please make sure that there are no obvious transport damages. Should you notice any damages on the
connection panel or on the casing, do not take the speaker system into operation and immediately consult
your local dealer.
Protection Class
This device falls under protection class III. The device always has to be operated with an appropriate power
unit. Always plug in the power unit last. Make sure that the plug is tightly connected with the outlet.
Condensation Water
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.
Liquids
Never put any liquids on the devices or close to it. Should any liquid enter a device nevertheless have it
checked by a qualified service technician before you operate it again. Any damages caused by liquids having
entered the devices are not subject to warranty!
Children and Amateurs
Keep away children and amateurs!
Maintenance and Service
There are no serviceable parts inside. Maintenance and service operations are only to be carried out by
authorized dealers!
CAUTION!
15