Safety Instructions - Omnitronic FAS 2 User Manual

Safety Instructions

2
Please read these instructions carefully before using the product.
They contain important information for the correct use of your
product. Please keep them for future reference.
• The wireless system consists of a hand-held microphone and
bodypack with integrated transmitter which serve for wireless
signal transmission to the receivert. The transmission range is
approx. 30 m and depends on the local conditions.
• These products are intended for use in the EU. The operation is
license-free in Germany but is subject to restrictions in certain
areas (status as of 2023): AT, BE, BG, CZ, DA, ES, FI, MT, LI, LT,
LV, NO, RO, SE, UK. Prior to use, make sure that the desired
frequencies are approved and legal in your country. Consult your
national authority for possible requirements.
• Only use the product according to the instructions given herein, to
avoid accidental injury or damage.
• We do not assume any liability for material and personal damage
caused by improper use or non-compliance with these operating
instructions. In such cases, the warranty/guarantee will be null and
void.
• Unauthorized rebuilds or modifications of the product are not
permitted for reasons of safety and render the warranty invalid.
• To reduce the risk of electric shock, do not open any part of the
product. Only connect the power adapter to a properly installed
mains outlet. The voltage and frequency must exactly be the same
as stated on the device. The mains outlet must be easily
accessible so that you can unplug the device quickly if need be.
• This product is intended for indoor use only. Protect it from
extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture,
recommended temperature range is -5 to +45 °C.
• Do not touch the power cord and connectors with wet hands as it
may cause electric shock.
• Cleaning of the product is limited to the surface. Make sure that
moisture does not come into contact with any areas of the terminal
connections or mains voltage control parts. Only wipe off the
product with a dry, lint-free cloth. Before cleaning, disconnect the
product from the mains.
flammable gases,
19 • EN
vapors and solvents. The