Fisher & Paykel ACTIVESMART RF523G User Manual / Installation Manual page 34

ACTIVESMART™ OPERATING INSTRUCTIONS
Bottle holder (where fitted)
The bottle holders can be used to store a variety of bottles.
● ●
To position the bottle holder in your refrigerator, slot the back edge of the bottle holder
● ●
onto the back trim of any shelf in the fresh food compartment.
Unused bottle holders can be stacked up on top of one another so they do not take up
● ●
unnecessary shelf space.
Bottles are best stored with the neck of the beverage facing the front of the refrigerator.
● ●
Glass shelves- Refrigerator
Standard glass shelves can not be repositioned in your refrigerator.
● ●
Refer to 'Cleaning and care — Shelving' for details on
how to remove the standard glass shelves for cleaning.
Cantilever glass shelves — half-width and full-width
The cantilever glass shelves are designed to be
● ●
strong and versatile.
The half-width and full-width shelves are removable
● ●
and can be repositioned in your refrigerator.
Place the half-width shelves side-by-side when
● ●
you store large items such as platters.
Place the half-width shelves at different levels to
● ●
maximise the storage space when you store items
of varying heights.
To remove for repositioning
Hold the front and back edge of the shelf
1
firmly (refer to A).
Push the shelf up vertically to dislodge from
2
back support lugs (refer to B).
Slide the shelf towards you (refer to C).
3
Glass shelves – Freezer
Some models have glass shelving under the
freezer bins. These can be removed if required.
To remove
Remove the bin above the glass shelf (refer
1
to 'Fixed bins')
Push on the clips on both sides of the shelf (A)
2
Lift the shelf up to remove from the supports
3
32
A
B
C
A