Steam Ironing - Russell Hobbs Turbo Steam RHC925 Instructions & Warranty

• The fabric type will flash to indicate that the iron is heating up or cooling down.
• When the fabric type stops flashing and stays on the fabric type you have selected, the iron
is ready for use.
• Press the Temperature down button
heard when you press the button.
• When the fabric type stops flashing and stays on the fabric type you have selected, the iron
is ready for use.
TURBO STEaM MODE
• Select the steam mode by pressing the Steam Mode selection button
• The Low Steam Mode
High Steam Mode can be selected with the 'Cotton' to 'Linen' fabric settings.
• If you press the steam mode selection button with the non-permitted fabric setting a double
continuous beeping sound will be heard.
• To activate/inactivate the continuous steam ironing press the Steam button
display on the LCD and a beep sound will be heard.
• When the iron is at the appropriate temperature, the Fabric Type will stop blinking and a beep
sound will be heard.
• The iron is now ready for use.
ELECTRONIC COOL SpRaY MIST
NOTE: Water spotting affects some fabrics. Test this out on a hidden part of the fabric first. The
cool spray mist works with dry or steam ironing, as long as there is water in the tank.
This function can only be used when the iron is turned on.
• Check that there is water in the water tank.
• Lift the iron off the fabric.
• Aim the cool spray mist nozzle at the fabric.
• Press and hold the Spray button. This is a continuous
spray of water. To discontinue the spray stop pressing
the spray button.

STEaM IRONING

• Check that there is water in the water tank.
• Select the Turbo Steam Mode by pressing the Steam Mode selection button
Steam Mode
Mode can be used from the 'Cotton' to 'Linen' fabric settings.
• A double, continuous beep sound will be heard if you press the Steam Mode selection button
with the non-permitted fabric setting.
• To activate the steam release, press the Steam On/Off button
heard.
• The iron is now ready to use.
• To de-activate the Steam Release, press the Steam On/Off button
will be heard.
can be selected with the 'Blend' to 'Linen' fabric settings and the
can be used from the 'Blend' to 'Linen' fabric settings and the High Steam
for the reverse order setting. A beep sound will be
.
, the icon will
. The Low
once, a beep sound will be
once, a beep sound