Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Russell Hobbs Turbo Steam RHC925
Summary of Contents for Russell Hobbs Turbo Steam RHC925
- Page 1 WARRANTY Turbo Steam Iron RHC925 INSTRUCTIONS & WARRANTY RHC925_IB_051211...
- Page 2 (Warranty Period), for the period of:- (a) Two (2) years for Russell Hobbs products (see product packaging for details) (b) Two (2) years with five (5) year motor warranty for Russell Hobbs products (see product packaging for details) (c) Limited Lifetime, Ten (10) years for Russell Hobbs cookware.
- Page 3 Warranty Conditions 4. The Goods must be used in accordance with the manufacturer’s instructions. This Warranty does not apply should the defect in or failure of the Goods be attributable to misuse, abuse, accident or non-observance of manufacturer’s instructions on the part of the user.
- Page 4 Congratulations on the purchase of your Russell Hobbs appliance. Each unit is manufactured to ensure safety and reliability. Before using the appliance for the first time, please read the instruction booklet carefully and keep it for future reference. Pass it on if you pass on the appliance.
-
Page 5: Temperature Setting Guide
BEFORE USING FOR THE FIRST TIME • Fill the water tank with clean water, and then empty the water to ensure the tank is clean of any manufacturing residues. Refill the tank. • The iron may give off an odour and small amount of vapour when switched on for the first time. This is normal and will stop as the element cures. • Press the burst of steam trigger 3 or 4 times, to prime and flush clean water through the burst of steam pump. • Press the cool spray mist button 3 or 4 times, to prime and flush clean water through the cool spray mist pump. • Iron an old piece of dampened cotton fabric or linen, to clean the soleplate. pREpaRaTION • Check for textile care symbols ( ) on items to be ironed. • Iron fabrics needing low temperatures first, then those that need medium temperatures , and finish with those needing high temperatures TEMpERaTURE SETTING GUIDE label marking temperature dot setting cool - nylon, acrylics, polyester... -
Page 6: How To Set The Temperature
FIRST TIME IRONING Remove any protective film or stickers for the soleplate and the cabinet. • Plug the power cord into the wall power outlet, and switch the outlet on. • A beep sound will be heard and the LCD will display all icons for 1 second and then turn off. • Press the Temperature down button once to turn the iron on. The LCD will display the fabric type, the temperature indicators and the steam off indicator. • Set the temperature as instructed in the ‘How to Set Temperature’ section. • The iron is ready for use. • Use an old piece of fabric when using the iron for the first time. • When the water tank is empty and there is no more steam produced refer to the ‘How to Fill Water’ section. STEaM GENERaTOR pUMp pROTECTIVE MODE If there is no water in the water tank and you are using steam for ironing, you would hear a strange noise from the steam generator pump. -
Page 7: Steam Ironing
• The fabric type will flash to indicate that the iron is heating up or cooling down. • When the fabric type stops flashing and stays on the fabric type you have selected, the iron is ready for use. • Press the Temperature down button for the reverse order setting. A beep sound will be heard when you press the button. • When the fabric type stops flashing and stays on the fabric type you have selected, the iron is ready for use. TURBO STEaM MODE • Select the steam mode by pressing the Steam Mode selection button • The Low Steam Mode can be selected with the ‘Blend’ to ‘Linen’ fabric settings and the High Steam Mode can be selected with the ‘Cotton’ to ‘Linen’ fabric settings. • If you press the steam mode selection button with the non-permitted fabric setting a double continuous beeping sound will be heard. •... - Page 8 HOW TO SELECT THE pULSE STEaM MODE This function saves the amount of water used during steam ironing. • Check that there is water in the water tank. • Select the Pulse Steam Mode by pressing the Steam Mode selection button . The Pulse Steam Mode can be selected with the ‘Blend’ to ‘Linen’ fabric settings. • A double, continuous beep sound will be heard if you press the Steam Mode selection button with the non-permitted fabric setting. • To activate the Pulse Steam Release press the Steam On/Off button once, a beep sound will be heard. •...
-
Page 9: Auto Shut Off
aUTO SHUT-OFF Auto shut-off is a safety mechanism to stop the soleplate from heating when the iron is plugged in and motionless. It does not turn the iron off. • The automatic shut off device will activate in the: Upright position: After approximately 8 minutes Horizontal position: After approximately 30 seconds • When auto shut-off activates, the iron will beep once, and the ││ icon will flash on the LED display. The LED display will turn off and display a grey colour (not blue). • To switch on again, lift it up, tilt it forward, then sit it upright to return to its operating temperature. The iron will beep once and the LED display will turn on. • No settings are lost during auto shut-off. -
Page 10: Emptying And Storing
aNTI-DRIp The anti-drip system is designed to prevent water escaping from the soleplate when the iron is too cold. During use, the anti-drip system may emit a loud clicking sound, particularly during heat-up or whilst cooling down. This is perfectly normal and indicates that the system is functioning correctly. -
Page 11: Important Safeguards
IMpORTaNT SaFEGUaRDS When using electrical appliances, basic safety precautions should always be followed, including: 1. To protect against electrical hazards, do not immerse the power cord, plug or iron in water or any other liquid. 2. Do not use outdoors or in damp or moist areas. 3. - Page 12 RUSSELL HOBBS and logo are Trade Marks of Spectrum Brands, Inc., or one of its subsidiaries. ©2011 Spectrum Brands, Inc.
Need help?
Do you have a question about the Turbo Steam RHC925 and is the answer not in the manual?
Questions and answers