How To Set The Temperature - Russell Hobbs Turbo Steam RHC925 Instructions & Warranty

FIRST TIME IRONING
Remove any protective film or stickers for the soleplate and the cabinet.
• Plug the power cord into the wall power outlet, and switch the outlet on.
• A beep sound will be heard and the LCD will display all icons for 1 second and
then turn off.
• Press the Temperature down
display the fabric type, the temperature indicators and the steam off indicator.
• Set the temperature as instructed in the 'How to Set Temperature' section.
• The iron is ready for use.
• Use an old piece of fabric when using the iron for the first time.
• When the water tank is empty and there is no more steam produced refer to the 'How to Fill
Water' section.
STEaM GENERaTOR pUMp pROTECTIVE MODE
If there is no water in the water tank and you are using steam for ironing, you would hear a
strange noise from the steam generator pump. In this case, unplug the iron and fill the water tank
with water. When you switch it on again this noise will disappear.
If you don't unplug the appliance and refill the water after the noise has been sounding for
30 seconds the micro-pump will stop working and the self clean
panel and a beeping sound will be heard.
Select the Steam Off Mode by pressing the steam On/Off button
indicate the iron is in steam off mode.
Switch off the iron by pressing and holding the Temperature down / ON/OFF
seconds. The LCD will go blank and a beep sound will be heard.
Unplug the iron and refill with water.
Switch the iron on by pressing the Temperature down / On/Off
On mode by pressing the Steam On/Off button
function will only work on higher temperatures (Blend, Wool, Cotton, Jeans, Linen).

HOW TO SET THE TEMpERaTURE

There are 9 different fabric settings at the touch of a button to make ironing easier.
• Sit the iron on its heel.
• Plug the power cord into the wall power outlet, and switch it on by pressing the Temperature
down / On/Off
• A beep sound will be heard and the LCD will display all icons for 1 second and
then turn off.
• Press the Temperature down/ On/Off
fabric type, the temperature indicators and the steam off indicator.
• Press the Temperature up button
ACRYL to LINEN. A beep sound will be heard when you press the button.
button once to turn the iron on. The LCD will
button.
for steam ironing. Remember the turbo steam
button once, the LCD will display the
to raise the temperature setting from
icon will blink on the LCD
, the will stop flashing and
button for 2
button once. Select the Steam