IMPORTANT SAFEGUARDS When using this appliance, basic safety precautions should always be followed, including the following: Read all instructions before, and follow whilst using this appliance. 1. To protect against electrical hazards, do not immerse the power cord, plug or iron in water or any other liquid.
BEFORE USING FOR THE FIRST TIME • Fill the water tank with clean water, and then empty the water to ensure the tank is clean of any manufacturing residues. Refill the tank. • The iron may give off an odour and small amount of vapour when switched on for the first time.
PREPARATION • Check for textile care symbols ( ) on items to be ironed. • Iron fabrics needing low temperatures first, then those that need medium temperatures , and finish with those needing high temperatures TEMPERATURE SETTING GUIDE LABEL MARKING TEMPERATURE SETTING •...
REDUCING TEMPERATURE This can take time, as the iron has to lose the heat it has built up. It is best to organise your ironing so that you do not need to reduce the temperature. STEAM IRONING • To steam iron, set the temperature control to or higher.
VERTICAL STEAM Vertical steaming removes wrinkles from hanging clothes, hanging curtains, and furnishing fabrics. • Check that there is water in the tank. • Set the temperature control to max. Set the steam control to • Check that there is nothing behind the fabric that may be damaged by the steam or heat.
• Release the self clean button when done. • Empty the remaining water from the tank. • Unplug the iron, and sit the iron on its heel to cool. • When it is cold, wipe off any moisture. • Store the iron on its heel, to avoid corrosion and damage to the soleplate. CLEANING •...
Page 8
Spectrum Brands Australia Pty Ltd Spectrum Brands New Zealand Ltd Locked Bag 3004 Braeside PO Box 9817 Newmarket Victoria 3195 Australia Auckland 1149 New Zealand Customer Service in Australia Customer Service in New Zealand TollFree: 1800 623 118 TollFree: 0800 736 776 Email: info@spectrumbrands.com.au Email: service@spectrumbrands.co.nz Website: www.spectrumbrands.com.au...
Page 9
Warranty Conditions 4. The Goods must be used in accordance with the manufacturer’s instructions. This Warranty does not apply should the defect in or failure of the Goods be attributable to misuse, abuse, accident or non-observance of manufacturer’s instructions on the part of the user.
Need help?
Do you have a question about the Diamond Elite RHC590 and is the answer not in the manual?
Questions and answers