Table of Contents
Advertisement
aNTI-DRIp
The anti-drip system is designed to prevent water escaping
from the soleplate when the iron is too cold.
During use, the anti-drip system may emit a loud clicking
sound, particularly during heat-up or whilst cooling down.
This is perfectly normal and indicates that the system is
functioning correctly.
EMpTYING aND STORING
•
Disconnect the iron from the mains supply outlet.
•
Hold the iron upside down and gently shake it to remove the
remaining water.
•
When the iron completely cools down, store it vertically in a
safe place.
CLEaNING
•
Unplug the iron when not in use, and before cleaning.
•
Allow the iron to cool down completely before cleaning and storing away.
•
Wipe outer surfaces with a damp cloth. If necessary, use a little dishwashing liquid.
•
Remove spots, or burnt on fabrics, by ironing a damp cotton or linen cloth with the iron
hot. Take care not to scratch the soleplate.
•
Do not immerse the iron in water or any other liquid.
•
Do not use harsh or abrasive cleaning agents, solvents or scourers on the soleplate as
these will damage the surface coating.
Hide quick links:
Advertisement
Table of Contents
