Troubleshooting - Philips CD2301S/73 User Manual

Problems
The phone does not work at all.
The phone does not ring.
There is no dial tone.
Caller ID does not work properly.
The Call Waiting call cannot be
answered.
The empty battery icon appears
soon after the batteries are charged.
The handset is unable to register.
If the above solutions do not help, remove the power from both, the handset and the base. Wait for 15 minutes
and try again.

Troubleshooting

• Make sure that the adaptor and the phone cord are connected
properly.
• Check that the batteries are fully charged and installed
properly.
• This phone does not work during power failure.
• Make sure that the adaptor and the phone cord are connected
properly.
• Move the handset closer to the base unit.
• Make sure the handset ringer is turned on.
• Check that the phone cord is connected properly.
• Check the handset is fully charged.
• Move the handset closer to the base unit.
• Check with your local phone company that the CID service is
subscribed to.
• Let the phone ring at least once before answering.
• Check with your local phone company and select the correct
recall duration.
• Replace the batteries with new ones (use only rechargeable
baterries).
• Make sure that the PAGING key has been pressed for 4
seconds before pressing the OK key.
• Each base can only register up to four handsets. See section
"Un-registering a handset", page 26 - to remove a currently
registered handset.
Solutions
EN
31