Additional Features; Lock Keypad; Shortcut For Turning Handset Ringer On/Off; Message Waiting Indication - Philips CD2301S/73 User Manual

Philips cordless telephone cd2301s

Hide thumbs Also See for CD2301S/73:

Quick start manual (2 pages)

Table Of Contents

Table of Contents

Lock keypad

Keypad can be locked to prevent accidental key press.

When the keypad is locked, you can still answer an incoming call by pressing

is active. When the call is ended, the keypad will be locked again.

To lock and unlock the keypad,

Long press

to lock or unlock the keypad.

When locked, LOCKED appears on the display.

Shortcut for turning handset ringer on/off

You can use this shortcut to turn on/off the handset ringer.

Long press

Note :

appears to indicate the ringer is turned off. The handset will not emit any sound for any

incoming call. Only the handset backlight will turn on to inform you about an incoming call.

Message waiting indication

If you have subscribed to the voicemail service from your local service provider,

a new message in your mailbox. After you've listened to all the new messages,

You can also turn it off by long press

Paging

You can locate the handsets by using this feature.

Press

on the base.

All handsets registered to the base will produce the paging tone for 30 seconds and the screen displays

PAGING.

Note : You can stop the paging by pressing any key on each handset or pressing

again.

Caller ID first ring suppression

If you have subscribed for Caller ID service by your operator, your phone will suppress the first ring before the

CID. After resetting, first ring suppression will be deactivated. Your phone will automatically detect if CID

service is subscribed after the first call. If CID service is detected, your phone will start suppressing the first

ring after the first call.

Note : Once first ring suppression is activated, the first ring before CID will be suppressed even after

you have unsubscribed the CID service. If you have unsubscribed the CID service and do not wish to

have the first ring suppressed, please reset the power of the base by disconnecting and re-connecting

the power supply.