Call - Philips CD2301S/73 User Manual

Making a call
1. Press and wait for the dial tone.
2. Dial the number you want to call. The number appears on the display and is dialled.
Note : If you move too far away from the base unit during a call, your phone will sound an alert tone,
and will flash. You need to move closer to the base unit or your call will be disrupted.
Note : If, during a call, your phone starts to run out of batteries, you will be warned by an alert tone.
You should charge the handset as soon as possible or it would turn off when it is out of battery. Placing
the handset on the base unit or charger will end the current call.
Call timer
The call timer shows the duration of your current call on display. It is shown in minutes and seconds (MM-SS)
in the first hour. After that, it will be shown in hours and minutes (HH-MM).
Preparatory Dialling (Pre-Dial)
With pre-dial, you can see and edit the number you are calling on the display before dialling it.
1. Enter the number you want to call.
The number appears on the display. You can enter up to 20 digits.
2. Press .
Note : Press
Long press the # key to enter a pause. It is displayed as P.
Redialling the last number
With off-hook redialling, you can redial the last number dialled.
1. Press .
2. Press .
Calling from the redial list
Your phone records the last 5 numbers you have dialled. Only the first 20 digits of each number are stored.
To redial one of the last 5 dialled numbers,
1. Press . The most recently dialled number appears.
2. Press UP / DOWN
If the name and number are available, press
3. Press .

Call

to delete an incorrect digit.
to choose the number you want to dial.
to toggle between them.
EN
13