It must be and operation. mounted in the save place to 1. Application avoid accidental touch. Manufacturer: 1.1 The TPRK Series is multi-stage 4.1 Submerged Depth Walrus Pump Co., Ltd. centrifugal pump designed To avoid dry running and damage the...
Page 3
5.4 Electrical connection should be in 7.4 The pump can not be used to transfer Attention, when the pump accordance with diagram shown on explosive liquids. Extra protective is carried, we suggest you the connecting box, and motor current required working liquid way to carry pump as below:...
Fig.1 10. Trouble Shooting Make sure electricity supply has been switched off before trouble shooting Fault Cause Remedy Min. 65 mm 1. Motor does not Supply failure. Connect the electricity supply. TPRK run when started. Fuses are blown. Replace fuses. 25 mm Motor starter overload has tripped out.