Advertisement
1. Make sure that the radio code is available before disconnecting battery. (applies
to Anti-theft radios only). Disconnect Negative battery terminal.
2. Remove the radio.
3. Access the antenna connections at the back of the radio. Unplug the Factory
antenna cable and connect to the "Female" Antenna "IN" cable of the IPFMRDS.
NOTE: Some vehicles do not have standard antenna connections and require the
use of Male/Female Antenna adapters. Adapters are sold separately. Consult
Tech support if your antenna connection differs from the IPFMRDS plugs.
4. Connect the "Male" Antenna "OUT" cable coming from the IPFMRDS to your radio's
antenna location.
5. Connect the Power, Ignition and Ground wires of the IPFMRDS power cable. Call
Tech Support if you need assistance with Factory wires colors and/or locations.
Antenna OUT
Antenna IN
(to Radio)
(to Car Ant.)
IPFMRDS Module
Frequency
Selector
Not Used
SCOSCHE STEREO INSTALLATION COMPONENTS
DIAGRAMS:
Black
IPFMRDS Module
(Ground)
Yellow
(+12V constant)
Power Cable
USB Upgrade
port
iPod Cable
Red
(+12V ignition)
iPod
MENU
STEREO DASH KITS
Advertisement
