Daewoo Compact Wooden User Manual page 9

FM Radio Menu
Whilst listening to the FM radio press and hold the Info/Menu button (11) to enter the FM radio
menu.
Use the Previous (10) or Next (8) buttons to scroll through the various menu options, press the
Volume/Enter control (9) to select the desired option:
a. Time & Date – Manually set the Date and Time.
b. System Version – Shows the latest software version the radio has installed.
c. Factory Reset – Allows a full reset of the radio back to the original factory settings.
NB any radio stations previously saved in the presets will be lost after a Factory Reset.
d. FM Scanning – Select from scanning strong stations 'Only' or scan all stations by selecting 'All'.
Operating Instructions – Setting and Using the Alarm Function
1. Press the Alarm button (5) and then press the Volume/Enter control (8) until the "Alarm 1 OFF"
flashes on the LCD Display (3).
2. Press the Previous (10) or Next (9) controls to select "Alarm 1 ON", press the Volume/Enter
control (8) to confirm selection.
3. The hours will flash, press the Previous (10) or Next (9) controls to select the current hour, press
the Volume/Enter control (8) to confirm selection.
4. The minutes will flash, press the Previous (10) or Next (9) controls to select the current minute,
press the Volume/Enter control (8) to confirm selection.
5. "Vol" will flash on the LCD Display (3), press the Previous (10) or Next (9) controls to select the
alarm volume (select from 0 – 15 zero being the lowest and 15 the highest volume), press the
Volume/Enter control (8) to confirm selection.
6. The alarm sound source "SRC" will flash on the LCD Display (3), press the Previous (10) or Next (9)
controls to select the alarm source to wake up to: Alarm/DAB/FM, press the Volume/Enter
control (8) to confirm selection.
7. The alarm "Mode" will flash on the LCD Display (3), press the Previous (10) or Next (9) controls to
select when the alarm will go off: Once/Daily/Weekends/Weekdays, press the Volume/Enter
control (8) to confirm selection.
NB to set alarm 2:
1. With the radio on, press the Alarm button (5) twice and then press the Volume/Enter control (8)
until the "Alarm 2 OFF" flashes on the LCD Display (3).
2. Press the Previous (10) or Next (9) controls to select "Alarm 2 ON", press the Volume/Enter
control (8) to confirm selection. Continue from Step 3 above to set alarm2.
NOTE: You can press the Info/Menu button (11) to skip back one step while the setting the alarm.
Display Dimming
With the radio off, press the Preset/Dimmer button (4) to vary the brightness of the LCD display (3).
Silencing the alarm
Press the Standby/Mode button (1) on the front panel to silence the alarm.
Snooze Mode
After the alarm sounds, the Sleep/Snooze button (7) can be pressed to snooze the alarm. The alarm
will be silent for a further 9 minutes before sounding again. Press the Standby/Mode button (1) to
cancel the snooze mode and alarm.
9