Specifications - WimTec PROOF S4 Assembly And Operating Instruction

EN
PROOF S4
Specifi cations
Operating voltage:
Power consumption:
Magnetic valve:
Close-Active range:
Flushing stop:
Flow rate:
Water temperature:
Flow rate:
Water inlet:
Water outlet shower:
Cover plate:
Flush-mount set:
Front plate:
Thermost handle:
All dimensions in mm:
185
Outlet rain shower
R 1/2" IG
Electric
installation
tube for 12 V=
WW
R 1/2" IG
140
152
12 Shower control
via power supply 230 V 50 Hz / 12 V=
Art.No. 117 899 - power supply for one control unit
Art.No. 113 792 - power supply for up to 5 control units
max. 3 W
cartridge 6 V
1 - 3 cm
set to 30 s by default (confi gurable from 10 s - 60 s)
0,05 - 0,6 MPa (0,5 - 6 bar)
max. 70 °C (max. 80 °C for max. 10 min)
max. 22 l/min at 0,3 MPa (3 bar)
R 1/2" IG
R 1/2" IT
W/H/D: 185 x 213 x 11 mm
W/H/D: 140 x 169 x 95 - 120 mm
Stainless steel / Chromed brass
Chromed brass
11
tile
plaster
CW
R 1/2" IG
min 95
max 120
WimTec PROOF S4
Power supply 230 V / 12 V not
mountable in basic kit or in any
masonry
23
Power supply: 2 x 0,5 mm
total cable length
Power supply. 1-connect. Art.Nr. 117 899
Power supply. 5-connect. Art.Nr. 113 792
26
!
protective areas.
max. 100 m
2