Microlife Non Contact Plus NC 200 Manual page 3

Microlife Non Contact Thermometer NC 200
1 Measuring sensor
2 Tracking light
3 Self-indicator light
4 Display
5 M-button (memory)
6 MODE button
7 START/IO button
8 Battery compartment cover
9 All segments displayed
AT Ready for measuring
AK Measurement complete
AL Body mode
AM Object mode
AN Low battery indicator
AO Changing between Celsius and Fahrenheit
AP Recall mode
AQ Recall the last 30 readings
AR Measured temperature too high
AS Measured temperature too low
BT Ambient temperature too high
BK Ambient temperature too low
BL Error function display
BM Blank display
BN Flat battery
BO Date/Time
BP Beeper function setting
BQ Replacing the battery
BR Measuring countdown
BS Protective cap
Read the instructions carefully before using this device.
Type BF applied part
2
This Microlife thermometer is a high quality product incorporating
the latest technology and tested in accordance with international
standards. With its unique technology, this device can provide a
stable, heat-interference-free reading with each measurement.
The device performs a self-test every time it is switched on to
always guarantee the specified accuracy of any measurement.
This Microlife thermometer is intended for the periodic measure-
ment and monitoring of human body temperature.
This thermometer has been clinically tested and proven to be
safe and accurate when used in accordance to the operating
instruction manual.
Please read through these instructions carefully in order for you to
understand all functions and safety information.
Table of Contents
1. The Advantages of this Thermometer
• Measures in a matter of seconds
• Auto measurement with distance control
• Multiple uses (wide range of measurement)
• Accurate and reliable
• Gentle and easy to use
• Multiple readings recall
• Safe and hygienic
• Fever alarm
• Guidance system for self-measurement
2. Important Safety Instructions
3. How this Thermometer measures Temperature
4. Control Displays and Symbols
5. Setting Date, Time and Beeper Functions
6. Changing between Body and Object Mode
7. Directions for Use
• Measuring in body mode with auto measurement and
distance control
• Measuring in object mode without auto measurement
8. Changing between Celsius and Fahrenheit
9. How to recall 30 readings in Memory Mode
10. Error Messages
11. Cleaning and Disinfecting
12. Battery Replacement
EN