Handset Activation - Polycom KIRK Activation Manual

ActivAtion Guide
Polycom KIRK Base and Handset Activation

Handset Activation

Once you've activated the base, you can now connect the handsets to it.
Important: If you have multiple handsets, be sure to activate your handsets in the exact order specified in the Order Shipped email.
1. Order Shipped Email—Refer to the Order Shipped email for the Activation Codes for the handset(s) you wish to activate. This email also
specifies the order to activate them in.
2. Check Your Base Unit—Be sure you've already activated the base unit and it is within 100 feet of the handset(s).
3. Power Down Handset—Power down the handset you are activating by holding down the left softkey for 2 seconds, then press Yes.
4. Power Up Handset—Wait 2 minutes, then hold down the left softkey for 2 seconds to power up the handset.
5. Enter Activation Code—You will see Enter AC (Activation Code) on the phone screen. Enter the 4-digit activation code for the handset.
KIRK
Auto-subscription
Enter AC code...
1
Number:
5683
OK Exit
After you enter the activation code, you will see Connecting... on the handset screen.
KIRK
Auto-subscription
Connecting...
Menu Shortcut
You will see your extension number on the display. Your handset is ready to use.
3
TIP: If you are not prompted to
Enter AC, power down the
handset, wait 2 minutes
and power it up again. If
that fails, please refer to
the Advanced Activation
section of this document for
instructions.
KIRK
1002 16:57
Menu Shortcut