Nortel Meridian 1 Manual page 51

Procedure 13
Keyboard dialing from the ASIM data station (Part 7 of 9)
Step Action
Quit Modify
34 Enter Q (CR).
35 Enter a disconnect command, such as LOGO or Control + D, to end session and to
initiate call disconnect by the host terminal. This causes host to drop DTR and release
the connection (Note 9).
or
Operate ASIM RELEASE key.
or
At the terminal, turn LINE/LOCAL to LOCAL or POWER switch to POWER OFF.
or
Power down ASIM for about 1.6 seconds.
or
In asynchronous operation, operate break key for 1.6 seconds.
(For terminals with overlapping timed breaks, it is necessary to operate the break key
several times. This method does not work on terminals with non-overlapping timed
breaks.)
Call disconnect procedures
36 Call
disconnected.
Operation procedures and tests
Terminal
Prompt
Echo
Q A—AUTODIAL
(CR)—AUTODIAL
C—CALL
D—DISPLAY
SELECT:
CALL RELEASED
Meridian data features Operations and tests
Page 51 of 86
Comment
R—REMOTE CALL
S—SPEED CALL
M—MODIFY
Try any other feature or
place a data call.
The prompt only
appears if ASIM is on
(Note 11).