Nortel Meridian 1 Manual page 30

Page 30 of 86 Operation procedures and tests
Procedure 11
Keyboard dialing from colocated ADM (QMT8) data station (Part 2 of 4)
Step Action
Call to remote host (multiple hosts)
9 Enter subsequent
digits.
10 Enter (CR).
11 ADM connected
to modem
answers.
12 Enter (CR).
13 Enter remote
number digits
and (CR).
14 Remote host
answers.
15 Enter (CR).
16 Follow login
procedures.
17 Proceed with
data session.
553-2731-300 Standard 4.00 April 2000
Verification
RINGBACK tone on speaker.
RINGBACK tone off.
MODEM CTRL lamp winks.
PDN lamp on.
CONNECT BEEP tone on.
DIAL tone on speaker.
DIAL tone off.
RINGBACK tone on.
RINGBACK tone off.
CARRIER tone on speaker.
DATA SHIFT lamp off.
MODEM CTRL lamp on.
CONNECT lamp on.
CARRIER tone off.
PDN lamp off.
Comment
All numeric input, # and * are
accepted. During call setup all
legal user input appears on
terminal screen.
If called modem is free, tone is
heard. (If it is busy, see step 18.)
Enter (CR) when DN IDLE
appears on screen (Note 5).
ENTER REMOTE NUMBER
appears on screen and PDN
lights.
Call is placed to the remote
number. If it is free, Ringback
tone is received. PDN is on. See
step 18.
Tone heard from remote modem.
Enter (CR) AT CARRIER tone.
CALL CONNECTED appears on
screen. PDN is off.
Host echoes all typed input.
Host echoes all typed input.