Nortel Meridian 1 Manual page 19

Procedure 4
Answering voice calls during data call setup (Part 1 of 2)
Step Action
Start condition.
1 Incoming call
presented to
PDN and VDN.
2 Press RLSF key.
3 Lift handset.
4 Place PDN on
hold.
5 Press VDN key
associated with
flashing lamp.
6 Press HOLD key.
7 Press DDN key.
8 Dial first digit of
required DDN.
9 Dial remaining
digits of DDN.
10 Called DDN
answers.
11 Press PDN key.
12 Press RLS key.
Operation procedures and tests
Verification
DDN, DATA SHIFT, and
POWER lamps on.
PDN and VFDN lamps flash.
DDN and DATA SHIFT lamps
off.
PDN lamp on.
PDN lamp flashes.
VDN lamp on.
VDN lamp flashes.
DDN and DATA SHIFT lamps
on.
DIAL tone on handset.
DIAL tone off.
RINGBACK tone on handset.
CONNECT lamp on.
RINGBACK off.
CONNECT BEEP on
handset.
PDN lamp on.
PDN lamp off.
Comment
DDN call setup in progress.
Data call setup abandoned.
Two-way conversation on PDN.
PDN on hold.
Two-way conversation on VDN.
PDN call on hold.
VDN call placed on hold.
Data station shifts to data mode.
Data call established.
Voice call reestablished.
PDN call disconnected
PDN lamp goes dark.
Meridian data features Operations and tests
Page 19 of 86