Advertisement
11/28/12
13. Enter the following information:
13.1. In the Name: field, type over �WAN_Bridge� with �Clearwave�.
13.2. Choose �DHCP� from the drop down menu of �the Type: section
13.3. Click on the �check box� next to Default Gateway which will insert a tick.
13.4. Verify the Grey out �PVC Settings� are correct
13.4.1.1.1.
13.4.1.1.2.
13.4.1.1.3.
13.4.1.1.4.
13.4.1.1.5.
13.4.1.1.6.
13.4.1.1.7.
13.5. Then click on �Apply� at the bottom of the screen.
Once completed the screen should have all relevant information (see below screen shot).
ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
Parady ne 6218-A1-200
VPI is 0
VCI is 35
QOS is UBR
PCR is 0
SCR is 0
MBS is 0
CDVT is 0
12/30
Advertisement
