Advertisement
Note: If you have not adjusted the cooking time, power level or cooking temperature, the induction cooker
starts operating at the default settings of the selected mode.
During cooking, the fan switches on to keep the appliance cool. When you switch off the
,
appliance, the fan remains on for approx. 1 minute and then switches off automatically.
The time display shows the remaining cooking time. At the same time, the selected cooking
,
temperature or power level light goes on (Fig. 10).
When the cooking time has elapsed, the appliance beeps a few times.
,
The appliance automatically switches off and the power-on light goes out.
Note: If you want to stop cooking, press the power on/off button. The appliance then switches off.
Unplug the appliance after use.
Using the timer
You can use the cooking time/timer button to set the time at which you want the appliance to start
cooking at a preset cooking mode.
For example: if it is 14:00 hours and you want the appliance to start cooking at 18:00 hours, set the
timer to 4.00 (4 hours) and press the start button. After 4 hours, at 18:00 hours, the appliance
automatically starts cooking.
You can use the timer function for the stew, soup/congee, steam-lo and steam-hi modes.
You can set a start time of 5 minutes to 24 hours.
1
Follow steps 1 to 5 of section 'Using the different modes'.
Press the cooking time/timer button (Fig. 11).
The timer light goes on.
,
Note: If you are in the quick-start (manual) mode, you have to press the cooking time/timer button twice
to activate the timer.
Press the + and - buttons on the left side of the control panel to set the number of minutes
or hours after which you want the appliance to start cooking (Fig. ).
Note: When you press the + and - buttons briefly, the time increases or decreases by 1 minute. When you
press the buttons longer, the time increases or decreases by 5 minutes.
Note: If you want to adjust the cooking time, first press the cooking time/timer button and then press the
+ and - buttons on the left side of the control panel.
Press the start button to start the timer (Fig. ).
The start light goes on.
,
The time display starts counting down the time.
,
When the cooking process starts, the timer light goes out and the display shows that the
,
cooking process has started.
Cleaning and maintenance
Cleaning
Never immerse the appliance in water nor rinse it under the tap.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
Do not put vinegar on the crystallite cooking plate.
1
Unplug the appliance and let it cool down.
Clean the appliance with a damp cloth and, if necessary, with some mild cleaning agent.
EnglisH
11
Advertisement
