Download Print this page

Philips HD4922/00 User Manual page 13

Philips induction cooker hd4922 8 menus 8 power with touch sensor red

Advertisement

Problem
The timer light does not
go on when I set the
timer.
I cannot change the
power setting before I
select the stew mode or
soup/congee mode.
The appliance beeps
continuously.
The maximum power
setting for certain
cooking modes is very
low.
I cannot switch to a
different cooking mode
during cooking.
The fan works but the
appliance has not started
cooking.
Codes on the
Message
display
'--:--' flashes on
There is no cookware
the display
on the cooking plate or
the cookware is not
suitable for the
induction cooker.
E1
Unstable voltage in
power supply network
E2
The cooking plate has
overheated.
E3
The appliance
malfunctions
Solution
You have selected the quick-start (manual) mode or the preset hot
pot, stir-fry, boil, or keep-warm mode. You can only use the timer in
the stew, soup/congee, steam-hi and steam-lo modes (see
the 'Default and adjustable settings' table in chapter 'Using the
appliance').
The light is defective. Take the appliance to your Philips dealer or a
service centre authorised by Philips.
In the stew and soup/congee modes, the appliance first brings the
food to the boil and then switches to a lower power level. You can
only adjust the power level after the boiling stage.
You have put unsuitable cookware on the cooking plate or you have
removed the cookware from the cooking plate during cooking.
Place suitable cookware on the cooking plate.
In the stew and soup/congee modes, the appliance first brings the
food to the boil and then switches to a lower power level. You can
only adjust the power level after the boiling stage.
You cannot switch to a different cooking mode during cooking. If you
want to select a different cooking mode, press the power on/off
button to switch off the cooker. Then press the power on/off button
again to switch the cooker back on.
You have to press the start button within 1 minute after you press
the power on/off button. If you do not press the start button within 1
minute, the induction cooker switches off and the fan continues to
work for 1 minute to cool down the appliance.
What you should do
Place suitable cookware on the cooking plate.
Check if the voltage in your home is suitable for
the induction cooker.
Switch off the appliance and unplug it. Let it cool
down for approx. 10 minutes and then switch on
the appliance again.
Take the appliance to a Philips dealer or a service
centre authorised by Philips.
EnglisH
1

Advertisement

loading

This manual is also suitable for:

Hd4922