Preparing For Use; Before First Use; Control Panel And Display; Setting The Clock Time - Philips HD4768/01 User Manual

ENGLISH
10
If the power failure lasts longer than 2 hours and the failure occurs during a cooking process, the
rice cooker automatically resets to standby mode when the power supply resumes. Open the rice
cooker, remove its contents and start all over again.
If you have set the timer and the preset cooking process has not yet started when a power failure
occurs, the process starts when the power supply resumes, provided it resumes within 12 hours.

Preparing for use

Before first use
1 Remove the plastic bag between the inner pot and the heating element.
2 Clean the parts of the rice cooker thoroughly before you use the appliance for the first time
(see chapter 'Cleaning').
3 Dry all parts thoroughly before you start to use the appliance.
4 Attach the scoop holder to the body of the rice cooker (Fig. 2).

Control panel and display

The control panel has 12 buttons with which you operate the appliance. The display gives
information on the selected processes.
The display light goes on as soon as you press any button, to give you a better view of the display
information.
Note: When the appliance is cooking or reheating, the display light switches off after 10 minutes.
- Control panel and display (Fig. 3)
Up and down buttons
You can use the up and down buttons below the display to select the desired menu and to
adjust settings (clock, timer and cooking time).
Menu/control buttons
There are 4 control buttons on the top part of the control panel and 6 menu buttons on the
bottom part of the control panel.
A flashing button indicates that you can press this button to go to the next step. You can use the
Stop/Cancel button to stop a cooking process or to stop a preset timer. You can also use this button
as an "undo" button when you are programming a cooking process to go back to the previous
screen.
Menus
Some of the menus have submenus. When you press the buttons for these menus, the submenu
appears on the display. If a menu does not have a submenu, the first step of the cooking process
is shown on the display.
In some of the menus, text and animations are shown on the display to guide you through the
cooking process step by step.

Setting the clock time

Note: You cannot adjust the clock time during a cooking process or when the appliance is in keep-warm
mode.
1 Put the plug in the wall socket and switch on the mains.
,
The display shows the greeting message ('Good morning', 'Good afternoon' or 'Good
evening').
2 Press the Preset/Clock button twice (Fig. 4).
3 Press the up or down button to select 'Clock setting'. (Fig. 5)