Problem Possible Cause Solution - Fakir FILTER PRO User Manual

EN
ATTENTION!
Never use alcohol or solvent based cleaners. Otherwise, you may harm your device. Clean
your appliance with a soft, damp dry cloth. You can clean the dust container as the same.
Accessories such as hose, brush etc. should be checked and cleaned against blocking
periodically.

Problem Possible Cause Solution

Your appliance is processed via Quality Control against any malfunction. However if it is not
operational due to any reason, ensure that you have tried the solutions specified in the table
below before contacting Fakir Authorized Service.
Malfunction
Appliance does not
operate
Appliance does not
pick up dirt
If the machine is
making too much
noise during
operation
Possible Cause
Appliance is not plugged in or
is not switched on.
No electricity at socket
Power cord is damaged
Exhaust cover is not installed
Dust container is full or
blocked.
The selected brush is not
suitable for the surface.
Filter is dirty.
Hose, suction tube or nozzle
is clogged.
Accessories are not properly
installed
Vacuumed objects may be
clogging the airway.
Accessories are not properly
installed
Remedy
Plug in the power plug and switch on the
appliance
Test the vacuum cleaner on another socket,
where you are certain that there is electricity
Have the power cord replaced by a Fakir
Authorized Service.
Install the exhaust cover or make sure it is
installed properly
Empty/clean the dust container.
Replace your brush with one suitable for the
surface.
Clean or replace the corresponding filter.
See Filters section.
Check the accessories and remove the
blockage.
Check connections
Check accessories / filters
Check connections
68