Fakir FILTER PRO User Manual page 56

EN
You can also use "+"/"-" buttons on the controller located at pipe handle.
NOTE!
When you decrease the speed below minimum level using speed adjustment switch, the
appliance enters into "Stand-By" mode and "Power" indicator will turn on in red.
5. To activate or deactivate ION feature, it would be enough to press speed adjustment
switch. When ION feature is active, ION indicator on the display panel will light in white, and
if it is off, it will light in red.
NOTE!
It is recommended to activate ION feature at minimum speed for a few minutes for an
effective vacuum cleaning.
NOTE!
When using with the controller speed adjustment indicator lights will be gradually turning
on. Using this feature you can quickly adjust the speed to previously determined levels
instead of single levels.
56