Operating The Opener - Craftsman 200.57933 Owner's Manual

Operating the Opener

To prevent SERIOUS INJURY or DEATH:
- READ AND FOLLOW ALL INSTRUCTIONS AND WARNINGS IN THE OWNER'S MANUAL AND LABELS
- Keep remote and battery out of reach of children.
- NEVER permit children to access the push button or remotes.
- Operate the door ONLY when it is properly adjusted, and there are no obstructions and is in clear sight.
- ALWAYS keep a moving door in sight until completely closed. NEVER cross the path of a moving door.
- If travel limit adjustment is made, force adjustment may also needed.
- After ANY adjustments, the safety reverse test MUST be performed to ensure the door reverses on contact
with a 1-1/2" thick object (2x4 laid flat).
- ALWAYS ensure that your door is balanced and in good working condition.
Activating the Opener
Controls
Push Button
(Indoor)
1- Button Remote
Control
Wireless Keyless
Entry Keypad *
3-Button Mini
Remote Control*
*Optional
See Accessories in Repair Parts section of this manual for purchase.
WARNING
!
Emergency Release Handle
Actual Operating Scenario
Press and hold the push button until the door starts to move, and controls as follows:
- Open or close the door.
- Reverse the door while it is closing
- Stops the door while it is opening.
- Close the door when the photo eye safety system is not installed, misaligned or
obstructed INTENTIONALLY.
Same functions* as the push button with remote distance up to 100 ft. in open field.
*For safety concerns, the 1 - button remote WILL NOT work if the photo eye safety
system is not properly installed and aligned.
Program the keyless entry pad accordingly and access the door using the PIN
Remote distance up to 100 ft. in open field.
For safety concerns, the hand-held remote WILL NOT work if the photo eye safety
system is not properly installed and aligned.
Courtesy Light
Push Button
Photo Eye Safety System
Invisible Light Beam
Operation
code.
23