Towing; Drive Disconnect Hub - JLG 450A Operator's And Safety Manual

SECTION 4 - MACHINE OPERATION

4.13 TOWING

RUNAWAY VEHICLE/MACHINE HAZARD. MACHINE HAS NO TOW-
ING BRAKES. TOWING VEHICLE MUST BE ABLE TO CONTROL
MACHINE AT ALL TIMES. ON-HIGHWAY TOWING NOT PERMIT-
TED. FAILURE TO FOLLOW INSTRUCTIONS COULD CAUSE SERI-
OUS INJURY OR DEATH.
MAXIMUM TOWING SPEED 5 M.P.H. (8 K.M.H.) FOR NO LONGER
THAN 30-45 MINUTES.
MAXIMUM TOWING GRADE 25%.
Prior to towing the machine, complete the
following:
DO NOT TOW MACHINE WITH ENGINE OPERATING OR DRIVE
HUBS ENGAGED.
1. Retract, lower and position boom over rear drive
wheels in line with direction of travel.
2. Disconnect drive hubs by inverting disconnect cap.
(See Figure 4-6.) After towing the machine, com-
plete the following:
4-10
3. Reconnect drive hubs by inverting disconnect cap.
(See Figure 4-6.)
Figure 4-6. Drive Disconnect Hub
– JLG Lift – 3120748