Adjusting The Carrier Roller Pressure - DURKOPP ADLER 171 Service Instructions Manual

Puller

11.4 Adjusting the carrier roller pressure

Fig. 40: Adjusting the carrier roller pressure
(1) - Screw
To adjust the carrier roller pressure:
1. Loosen the screw (1).
2. Move the cylinder.
3. Tighten the screw (1).
Service Instructions 171/173 - 00.0 - 01/2020
①
• To increase pressure: Push the cylinder towards the A
• To reduce pressure: Push the cylinder towards the B
B
A
51