Technical Specifications; Product Description - Fermax VEO DUOX Installer Manual

TECHNICAL SPECIFICATIONS

Power supply (without polarity)
Consumption
- on standby: 35 mA
- maximum: 230 mA.
Number of terminals per dwelling
Address of each monitor: 6 digits
Operating temperature
Humidity
Screen OSD TFT 4.3
Resolution
Monitor dimensions:

PRODUCT DESCRIPTION

VEO Monitor:
BUTTONS
Button for lock release / calls to the concierge.
• When you are in communication with the Outdoor Panel (audio only or
video only or audio+video), pressing this button activates the lock release.
• With the arm hanging up (monitor idle), pressing this button makes a call
to the concierge (if there is a concierge and the monitor is in Day Mode or
Mixed Mode).
Auto-On button.
Connection via block camera or General Entrance camera (feature available
depending on the type of installation,
F1
Auxiliary Function F1.
Auxiliary Function (negative output "-" / command transmission).
Negative transmission: Negative output is emitted by terminal F1 when the F1
button is pressed, which also sends an F1 activation command in order to
activate an auxiliary device.
"
200 x 200 x 46mm - 8" x 8" x 1.8" - (Height x Width x Depth)
see Chapter Operation:
18 Vdc
3
000001...999999
[-5, +40 °C] / [23, 104 °F]
[0% - 90%]
Horizontal: 480 Line
TV
Vertical: 272 Line TV
Buttons
Led
Auto-on).
DUOX VEO MONITOR
7