Drive Status Leds - EMC VNX5300 Hardware Information Manual

1
1 3.5-inch 6-Gb/s SAS drives or 6-Gb/s NL-SAS
disk drives
2 DAE fault LED (amber)
3 DAE power on LED (blue)
Figure 56 3U, 15 (3.5-inch) DAE (front view)
Table 36 describes the Block and File VNX5300 platform DAE and the 3.5-inch disk

drive status LEDs

3U, 15 (3.5-inch) DAE and disk drive LEDs
Table 36
LED
DAE fault (location 2)
DAE power (location 3)
Disk drive fault (location 4)
Disk drive on/activity (location 5)
EMC® VNX5300™ Hardware Information Guide
2
4 Disk drive fault LED (amber)
5 Disk drive on/activity LED (green)
Color State
Amber On
Green On
Blue On
— Off
Amber On
— Off
Green On
Blinking, mostly on
Blinking at constant
rate
Blinking, mostly off
— Off
Disk-array enclosure expansion
3
5 4
VNX-000103
Description
Fault has occurred
Powering and powered up with
backend bus running at 2 Gb/s
Powering and powered up with
backend bus running at 6 Gb/s
Powered down
Fault has occurred
No fault has occurred
Powering and powered up
Disk drive is on with I/O activity
Disk drive is spinning up or down
normally
Disk drive is powered up but not
spinning
Note: This is a normal part of the
spin-up sequence, occurring during
the spin-up delay of a slot.
Disk is powered down
59