JVC LT-40C590 Instruction Manual page 29

Sleep Timer
The sleep timer automatically switches the TV to standby after the preset time has elapsed. The
clock will be set automatically when receiving a digital signal. Time must be set before using Sleep
Timer function.
Press the
standby mode: Off / 10 / 20 / ... / 180 / 240 min. The timer begins to count down from the
number of minutes selected.
Auto Standby
The unit will automatically switch to standby mode 4 hours after the last time the remote control
(4 h)
was used. A reminder screen will pop up and count down before the unit switches to standby
mode. To save energy you should always turn the auto standby function back to "ON".
OSD Timer You can select a time that your on-screen menus will be displayed: Off / 10 / 20 / 30 / 60 seconds.
If you select Off the menu will remain on the screen until you press a button to remove it.
Time Zone When you select a Time Zone city, the TV time is set by the time offset information based on Time
Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is
set automatically by a digital signal.
4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
5. Press the EXIT button to return to normal TV viewing.
buttons to select a period of time after which the TV automatically switches to
If you turn the TV off after setting the sleep timer, the sleep timer setting will be
erased.
Customising TV Settings 5
29