JVC LT-40FH96 Service Manual
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. TV
  5. LT-40FH96
  6. Service manual
JVC LT-40FH96 Service Manual

JVC LT-40FH96 Service Manual

Lcd flat television
Hide thumbs Also See for LT-40FH96:
Table of Contents

Advertisement

Quick Links

See also: User Manual
SERVICE MANUAL
11
2005
YA363
1
PRECAUTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
2
SPECIFIC SERVICE INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
3
DISASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
4
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16
5
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22
LCD FLAT TELEVISION
LT-40FH96
TABLE OF CONTENTS
COPYRIGHT © 2005 Victor Company of Japan, Limited
Preliminary
/S
BASIC CHASSIS
FL3
No.YA363
2005/11

Advertisement

Table of Contents
loading

Related Manuals for JVC LT-40FH96

Summary of Contents for JVC LT-40FH96

  • Page 1 LCD FLAT TELEVISION YA363 2005 LT-40FH96 BASIC CHASSIS TABLE OF CONTENTS PRECAUTION............... . . 1-3 SPECIFIC SERVICE INSTRUCTIONS .
  • Page 2 SPECIFICATION Items Contents Dimensions ( W × H × D ) 100.0 cm × 73.4 cm × 32.9 cm (39-3/8" × 29" × 13") [Included stand] 100.0 cm × 67.1 cm × 11.7 cm (39-3/8" × 26-1/2" × 4-5/8") [TV only] Mass 32.0 kg (70.4 lbs) [Included stand] 25.0 kg (55.0 lbs) [TV only]...

  • Page 3: Precaution

    SECTION 1 PRECAUTION SAFETY PRECAUTIONS (1) The design of this product contains special hardware, (6) Isolation Check (Safety for Electrical Shock Hazard) many circuits and components specially for safety After re-assembling the product, always perform an purposes. For continued protection, no changes should be isolation check on the exposed metal parts of the cabinet made to the original design unless authorized in writing by (antenna terminals, video/audio input and output terminals,...
  • Page 4 INSTALLATION 1.2.1 HEAT DISSIPATION 1.2.3 INSTALLATION REQUIREMENTS If the heat dissipation vent behind this unit is blocked, cooling To ensure safety in an emergency such as an earthquake, and efficiency may deteriorate and temperature inside the unit will to prevent accidents, ensure that measures are taken to prevent rise.
  • Page 5 HANDLING LCD PANEL 1.3.1 PRECAUTIONS FOR TRANSPORTATION 1.3.2 OPTICAL FILTER (ON THE FRONT OF THE LCD PANEL) When transporting the unit, pressure exerted on the internal LCD (1) Avoid placing the unit under direct sunlight over a panel due to improper handling (such as tossing and dropping) prolonged period of time.

  • Page 6: Specific Service Instructions

    SECTION 2 SPECIFIC SERVICE INSTRUCTIONS SYSTEM SETTEING Be sure to carry out the following operation at the end of SERVICE MENU SCREEN the procedure. (1) Set to 0 minutes using the [SLEEP TIMER] key. SERVICE MENU SERVICE MENU 1. ADJUST 1.
  • Page 7 TECHNICAL INFORMATION 2.3.1 LCD PANEL This unit uses the flat type panel LCD (Liquid Crystal Display) panel that occupies as little space as possible, instead of the conventional CRT (Cathode Ray Tube), as a display unit. Since the unit has the two polarizing filter that are at right angles to each other, the unit adopts "normally black" mode, where light does not pass through the polarizing filter and the screen is black when no voltage is applied to the liquid crystals.
  • Page 8 2.3.2 MAIN CPU PIN FUNCTION [IC7601 : DIGITAL PWB ASS'Y] Pin name Function Pin name Function VHOLD1 Data slice for main screen closed caption Not used HFLT1 I/O LPF for main screen closed caption video input Not used Not used Not used Not used Not used...

  • Page 9: Disassembly

    SECTION 3 DISASSEMBLY DISASSEMBLY PROCEDURE CAUTION AT DISASSEMBLY: • Be sure to perform the SYSTEM SETTEING, at the end of the procedure. • Make sure that the power cord is disconnected from the outlet. • Pay special attention not to break or damage the parts. •...
  • Page 10 STAND COVER JACK COVER STAND REAR COVER SHIELD COVER DIGITAL TUNER BACK BRACKET MODULE PWB D-AMP PWB DIGITAL PWB BRACKET COOLING FAN D-AMP PWB BRACKET SD CARD PWB ANALOG PWB SHIELD TERMINAL DIGITAL PWB POWER CORD HOLDER TUNER BASE POWER CORD SHIELD BASE DC-DC CON PWB POWER PWB...
  • Page 11 3.1.12 REMOVING THE SPEAKER (Fig.2) 3.1.17 REMOVING THE LCD PANEL UNIT (Fig.2) • Remove the STAND. • Remove the STAND. • Remove the REAR COVER. • Remove the REAR COVER. (1) Remove the 6 screws [A]. • Remove the BACK BRACKET. (2) Remove the SPEAKER (L /R).
  • Page 12 CARD BASE ASSY CARD PWB SHIELD SUB POWER PWB MAIN BASE BOTTOM FRAME CARD PWB TOP FRAME CARD PWB BRACKET SPEAKER LED PWB SPEAKER LED LENS FRONT PANEL FRONT Fig.2 1-12 (No.YA363)
  • Page 13 MEMORY IC REPLACEMENT • This model uses the memory IC. • This memory IC stores data for proper operation of the video and drive circuits. • When replacing, be sure to use an IC containing this (initial value) data. 3.2.1 MEMORY IC REPLACEMENT PROCEDURE 1.
  • Page 14 3.2.3 SETTINGS OF FACTORY SHIPMENT 3.2.3.1 BUTTON OPERATION 3.2.3.2 REMOTE CONTROL DIRECT OPERATION Setting item Setting position Setting item Setting position POWER INPUT CHANNEL CABLE-02 CHANNEL CABLE-02 VOLUME VOLUME MUTING DISPLAY ASPECT NTSC PANORAMA HD / ATSC FULL SLEEP TIMER THEATER PRO NATURAL CINEMA AUTO...
  • Page 15 REPLACEMENT OF CHIP COMPONENT 3.3.1 CAUTIONS (1) Avoid heating for more than 3 seconds. (2) Do not rub the electrodes and the resist parts of the pattern. (3) When removing a chip part, melt the solder adequately. (4) Do not reuse a chip part after removing it. 3.3.2 SOLDERING IRON (1) Use a high insulation soldering iron with a thin pointed end of it.

  • Page 16: Adjustment

    SECTION 4 ADJUSTMENT ADJUSTMENT PREPARATION BASIC OPERATION OF SERVICE MODE (1) There are 2 ways of adjusting this TV : One is with the 4.5.1 HOW TO ENTER THE SERVICE MODE REMOTE CONTROL UNIT and the other is the (1) Set to 0 minutes using the [SLEEP TIMER] key. conventional method using adjustment parts and (2) Press the [VIDEO STATUS] key and [DISPLAY] key components.

  • Page 17: Adjustment Mode

    4.5.4 ADJUSTMENT MODE This mode is used to adjust the VIDEO CIRCUIT and the MTS CIRCUIT. 4.5.4.1 HOW TO ENTER THE ADJUSTMENT MODE When the SERVICE MENU SCREEN of SERVICE MODE is displayed, press [1] key to enter the ADJUSTMENT MODE (Fig.2). 4.5.4.2 DESCRIPTION OF STATUS DISPLAY OF ADJUSTMENT MODE (4) WHITE BALANCE ADJUSTMENT MODE...
  • Page 18 INITIAL SETTING VALUES IN THE SERVICE MODE • Perform fine-tuning based on the "initial values" using the remote control when in the Service mode. • The "initial values" serve only as an indication rough standard and therefore the values with which optimal display can be achieved may be different from the default values.
  • Page 19 Item No. Item Variable range Setting value Item No. Item Variable range Setting value M073 1E48 00 - FF M123 1E7A 00 - FF M074 1E49 00 - FF M124 1E7B 00 - FF M075 1E4A 00 - FF M125 1E7C 00 - FF M076...
  • Page 20 Item No. Item Variable range Setting value Item No. Item Variable range Setting value M173 1EAC 00 - FF M223 1EDE 00 - FF M174 1EAD 00 - FF M224 1EDF 00 - FF M175 1EAE 00 - FF 4.6.4 DRIVE SYSTEM SETTING (Fixed values) M176 1EAF...
  • Page 21 ADJUSTMENT PROCEDURE 4.7.1 VIDEO CIRCUIT Measuring Item Test point Adjustment part Description instrument WHITE Remote [1.ADJUST] (1) Receive a NTSC 75% all white signal. BALANCE control unit S030: R DRIVE (Red drive) (2) Set "VIDEO STATUS" to "STANDARD". (HIGHLIGHT) S031: G DRIVE (Green drive) (3) Set "ASPECT"...
  • Page 22 SECTION 5 TROUBLESHOOTING SELF CHECK FEATURE 5.1.5 POINTS TO NOTE WHEN USING THE SELF CHECK FEATURE 5.1.1 OUTLINE In addition to circuit failures (abnormal operation), the following This unit comes with the "Self check" feature, which checks the cases may also be diagnosed as "Abnormal" and displayed and operational state of the circuit and displays/saves it during counted as "NG".
  • Page 23 5.1.6 DETAILS Self check is performed for the following items: < Page 1 of screen > Diagnosis Detection item Display Detection content Detection timing signal (line) Low bias line short Confirm the operation of the low bais (16V / 5V / LB_PRO Detection starts 3 seconds after protection...
  • Page 24 Victor Company of Japan, Limited AV & MULTIMEDIA COMPANY DISPLAY CATEGORY 12, 3-chome, Moriya-cho, Kanagawa-ku, Yokohama-city, Kanagawa-prefecture, 221-8528, Japan (No.YA363) Printed in Japan...

  • Page 25: Standard Circuit Diagram

    Preliminary LT-40FH96 STANDARD CIRCUIT DIAGRAM NOTE ON USING CIRCUIT DIAGRAMS 1.SAFETY Type The components identified by the symbol and shading are No indication : Ceramic capacitor critical for safety. For continued safety replace safety ciritical : Metalized mylar capacitor : Polypropylene capacitor components only with manufactures recommended parts.
  • Page 26 CONTENTS SEMICONDUCTOR SHAPES ..............2-2 WIRING DIAGRAM ..................2-3 BLOCK DIAGRAM ..................2-5 CIRCUIT DIAGRAMS ANALOG PWB CIRCUIT DIAGRAM ......................2-7 DIGITAL PWB CIRCUIT DIAGRAM ......................2-19 POWER PWB CIRCUIT DIAGRAM ......................2-51 LED PWB CIRCUIT DIAGRAM ......................... 2-55 SW PWB CIRCUIT DIAGRAM ......................... 2-56 D-AMP PWB CIRCUIT DIAGRAM ......................

  • Page 27: Wiring Diagram

    WIRING DIAGRAM DC-DC PWB CN8CV3 CN8CV1 CN8CV2 D-AMP PWB CN0DC LCD PANEL UNIT CN000W (INVERTER PWB:CN1) CARD PWB SPEAKER(R) SPEAKER(L) LCD PANEL UNIT CN0LV1 CN110 (CONTROL PWB:CN2) POWER PWB CN001 CN00A CN00P CN002 CN200L SD CARD DIGITAL PWB COOLING FAN CN001 CN1502 CN9701...
  • Page 28 (No.YA363)2-5 2-6(No.YA363)
  • Page 29 ANALOG PWB CIRCUIT DIAGRAM (1/6) SHEET 1 ANALOG PWB ASS'Y (1/6) SFL-1211A-M2 CARD PWB ASS'Y (2/2) CARD PWB ASS'Y (1/2) CN8CV1 (SHEET29) CN8CV2 (SHEET28) CNCV1 CNCV2 QGA1217C1-12X QGA1217C1-04X BS_A9V R101 100k BS_A9V R102 100k C101 IC106 R105 R106 DVI_L CD4066BNS-X C103 R103 100k...
  • Page 30 ANALOG PWB CIRCUIT DIAGRAM (2/6) SHEET 2 V1_S J401 D492 D401 J401 J401 S9648 QNZ0726-001 C402 BS_A5V V1_YIN PC_DET SHEET3 PC_DET D403 R491 PC_VS PC_VS V1_CIN PC_HS C401 PC_HS C491 PC_R PC_R PC_G R402 R401 PC_G D402 PC_B C403 PC_B J401 C492 J410...
  • Page 31 ANALOG PWB CIRCUIT DIAGRAM (3/6) SHEET 3 TU3001 ANALOG PWB ASS'Y (3/6) QAU0430-001 BS_A5V SFL-1211A-M2 U/V ANALOG TUNER SHEET1 M.PACK R3018 TV_V1 IC381 C383 C3006 C3007 M62320FP-X 47/16 OPEN L3002 NQL79GM-100X C3008 R3001 OPEN R3014 OPEN SDA0A5 R3011 R3015 OPEN SCL0A5 C381 C382...
  • Page 32 ANALOG PWB CIRCUIT DIAGRAM (4/6) SHEET 4 IC501 IC501 OLLC09108 OLLC09108 OLLC09448 R591 OPEN OPEN R504 R501 ANALOG PWB ASS'Y (4/6) R505 C508 R592 OPEN OPEN R593 OPEN R594 OPEN R595 OPEN OPEN OPEN C506 R596 OPEN OPEN OPEN C503 SFL-1211A-M2 R597 OPEN...
  • Page 33 ANALOG PWB CIRCUIT DIAGRAM (5/6) SHEET 5 VCC12V R613 ANALOG PWB ASS'Y (5/6) R614 C610 C609 SFL-1211A-M2 R609 C608 Q604 IC603 R610 R619 C611 R616 R611 R612 R615 R617 C612 R618 C613 SHEET1 LB_POW C642 R643 OPEN C644 C641 R645 C640 2.2k R646...
  • Page 34 ANALOG PWB CIRCUIT DIAGRAM (6/6) SHEET 6 ANALOG PWB ASS'Y (6/6) SFL-1211A-M2 STB_5V STB3.3V BS_A9V BS_A5V VCC5 R912 OPEN IC902 BA33BC0FP-X L902 NQL52EM-220X CN00H D903 C913 QGA2001F6-15X OPEN NEX51CM-335X C905 LCD_POW C904 NEHM1CM-476X NCB11AK-106X AC_IN STB_5V DC-DC PWB ASS'Y C906 CN00H NCB31EK-104X SCL3A5...
  • Page 35 DIGITAL PWB CIRCUIT DIAGRAM (1/16) SHEET 7 STB3.3V C7513 DIGITAL PWB ASS'Y (1/16) IC7502 IC7501 STB3.3V OPEN SFL0D151A-M2 C7512 R7536 OPEN OPEN SHEET16 CEC/TVLK Q7508 OPEN STB3.3V R7544 R7537 OPEN D7510 OPEN R7538 OPEN DIGITAL INPUT BLOCK CECIN D7511 OPEN STB_5V STB3.3V STB3.3V...
  • Page 36 DIGITAL PWB CIRCUIT DIAGRAM (2/16) SHEET 8 OLLC09109 OLLC09109 OLLC09109 OLLC09109 OLLC09109 NAX0118 NAX0118 NAX0118 NAX0118 X8831 -001X -001X -001X -001X OPEN BS_9V IC8801 TC7W74F-X TC7W74F-X TC7W74F-X TC7W74F-X OPEN IC8802 NJM2235V-X NJM2235V-X NJM2235V-X NJM2235V-X OPEN S-80928 S-80928 S-80928 S-80928 IC8803 OPEN BS_9V CLNB-G-W...
  • Page 37 DIGITAL PWB CIRCUIT DIAGRAM (3/16) SHEET 9 BS_9V BS_9V VC9-1 VC9-1 K8701 OPEN DIGITAL IC8702 C8701 C8702 OPEN OPEN OPEN YC2.5A YC2.5A VCC3D VCC3D PWB ASS'Y (3/16) C8710 C8711 VOUT C8714 C8715 C8716 OPEN OPEN R8718 OPEN OPEN OPEN OPEN K8702 OPEN SFL0D151A-M2...
  • Page 38 DIGITAL PWB CIRCUIT DIAGRAM (4/16) SHEET 10 DIGITAL PWB ASS'Y (4/16) SHEET12,18 SFL0D151A-M2 DIGITAL INPUT BLOCK BS_5V IC6402 K6403 K6401 R1170H331B-X SHEET7,11,16,20 LB_POW RA6403 DV1_R0 DV1_R0 C6402 C6403 C6445 NEX60GM-337X C6439 DV1_R1 DV1_R1 R6401 C6440 K6402 C6441 DV1_R2 DV1_R2 DV1_R3 DV1_R3 R6402 C6401...
  • Page 39 DIGITAL PWB CIRCUIT DIAGRAM (5/16) SHEET 11 BS_5V K8781 IC8781 OPEN OPEN R8786 OPEN YMIN_3 R8787 OPEN DIGITAL PWB ASS'Y (5/16) SHEET9 3DYC_C SHEET16 EXT3DON SHEET9 3DYC_V C8782 OPEN SFL0D151A-M2 3DYC_Y IC8782 OPEN MAIN_CCD SHEET21 R8788 OPEN SUB_CCD1 BYMIN_3 BS_LOUT R8789 BS_ROUT OPEN...
  • Page 40 DIGITAL PWB CIRCUIT DIAGRAM (6/16) SHEET 12 SHEET21,22 MI_OSDYM SHEET17,21,22 MI_OSDYS DIGITAL PWB ASS'Y (6/16) OSDB1 SHEET22 OSDB2 R6017 OSDB3 ASI0 SHEET21,22 OSDB4 R6018 ASI1 OSDB5 SFL0D151A-M2 IC6001 ASI2 VCC3D ASI3 JCC5060 C6002 0.1/16 BSI0 R6077 OPEN BSI1 BSI2 IC6002 BSI3 SN74LVC1G08V-X BSI4...
  • Page 41 DIGITAL PWB CIRCUIT DIAGRAM (7/16) SHEET 13 R6715 OPEN DIGITAL PWB ASS'Y (7/16) DD_OSDVS SHEET12,21,22 DD_OSDHS R6714 OPEN SFL0D151A-M2 VCC3D L6701 NQR0413-003X IC6001 C6701 JCC5060 NCF11CZ-475X R6712 R6713 DA_AGND C6705 OPEN DA_AVDD R6706 OPEN DA_REF C6707 R6707 OPEN R6701 OPEN DA_RSET DAB_AGND C6708...
  • Page 42 DIGITAL PWB CIRCUIT DIAGRAM (8/16) SHEET 14 DIGITAL PWB ASS'Y (8/16) SFL0D151A-M2 RA6108 RA6107 NRZ0080-220X NRZ0080-220X C6111 RA6116 C6110 RA6115 C6109 C6108 0.1/16 OPEN 0.1/16 OPEN NRZ0080-470X NRZ0080-470X C6125 0.1/16 C6124 /6.3 C6123 C6122 /6.3 IC6102 A8[AP] C6139 0.1/16 SD_CKE R6106 SD_CKE_M R6117...
  • Page 43 DIGITAL PWB CIRCUIT DIAGRAM (9/16) SHEET 15 DIGITAL PWB ASS'Y (9/16) RA7204 NRZ0080-473X SFL0D151A-M2 STB3.3V STB3.3V IC6001 JCC5060 R7201 R7202 R7208 R7225 IC7201 STB3.3V _BYTE R7212 OPEN C7209 RA7205 0.1/16 DQ15/A-1 NRZ0080-473X DQ14 DQ13 STB3.3V DQ12 R7228 R7221 R7211 OPEN _RESET DQ11 WP#/ACC...
  • Page 44 DIGITAL PWB CIRCUIT DIAGRAM (10/16) SHEET 16 DIGITAL OLLC09109 OLLC09109 OLLC09109 OLLC09109 OLLC09109 STB3.3V ADC081S IC7036 OPEN OPEN OPEN OPEN PWB ASS'Y (10/16) 021CIS-X IC7038 OPEN OPEN OPEN OPEN OPEN IC6001 UN2113-X UN2113-X UN2113-X Q7035 OPEN OPEN D7032 OPEN R7030 SHEET18 K7030 OPEN...
  • Page 45 DIGITAL PWB CIRCUIT DIAGRAM (11/16) SHEET 17 DIGITAL PWB ASS'Y (11/16) SFL0D151A-M2 PL_SDA VCC3D VCC3.3LV SHEET19 PL_SCL L6501 VCC3.3LV PL_SLE NQR0351-001X PL_PLE C6520 IC6001 CN0LV1 JCC5060 L6511 LGND LVB5 520M_TA1-1 520M_TA1-2 TA1- TA1- LVB6 520M_TA1+1 520M_TA1+2 TA1+ TA1+ LVB7 520M_TB1-1 520M_TB1-2 TB1- TB1-...
  • Page 46 DIGITAL PWB CIRCUIT DIAGRAM (12/16) SHEET 18 VCC3D ATSC TUNER MODULE OPEN CLK_DV1 IC6011 CN0BS VCC3D DV1_B0 BSY7 IC6012 CN110 BSY6 DV1_Y7 DV1_B1 TGND R6064 BSY5 DV1_Y6 BSCLK_0 TGND BSCLK DV1_B2 BSCLK BSY4 DV1_Y5 TGND R6065 BSY3 DV1_Y4 DV1_B3 BSHP_0 HSYNC BSHP BSHP...
  • Page 47 DIGITAL PWB CIRCUIT DIAGRAM (13/16) SHEET 19 DIGITAL PWB ASS'Y (13/16) SFL0D151A-M2 SHEET17 ALARM R6615 OPEN SHEET7,16 POW_LED R6617 OPEN PL_PLE SHEET7,16 DIMMER PL_SLE R6601 OPEN SHEET17 SHEET17 I2CREADY PL_SDA PL_SCL CN0FC OPEN K6601 OPEN SHEET20 LW_CK K6602 OPEN SHEET7,15,16,18,20,22 K6603 OPEN POW_GOOD...
  • Page 48 DIGITAL PWB CIRCUIT DIAGRAM (14/16) SHEET 20 BS_5V DIGITAL PWB ASS'Y (14/16) C6624 C6625 C6626 C6627 C6628 C6629 C6630 C6631 C6632 C6633 C6634 C6635 C6636 C6637 0.1/16 0.1/16 0.1/16 0.1/16 0.1/16 0.1/16 0.1/16 0.1/16 0.1/16 0.1/16 0.1/16 0.1/16 0.1/16 0.1/16 SFL0D151A-M2 BS_9V C6677...
  • Page 49 DIGITAL PWB CIRCUIT DIAGRAM (15/16) SHEET 21 DIGITAL PWB ASS'Y (15/16) SHEET7 SFL0D151A-M2 OSDB5 OSDB5 OSDB4 OSDB4 OSDB3 OSDB3 OSDG5 OSDG5 OSDG4 SHEET12,22 OSDG4 OSDG3 OSDG3 SHEET16,22 WAKE OSDR5 OSDR5 OSDR4 OSDR4 OSDR3 IC7602 OSDR3 STB3.3V R7624 DD_OSDVS SHEET12,17,22 R7625 DD_OSDHS MI_OSDYS MI_OSDYS...
  • Page 50 DIGITAL PWB CIRCUIT DIAGRAM (16/16) SHEET 22 OPEN OPEN CN0MI R7356 CN0ID STB_5V SHEET7 TVLINKOUT SHEET16,21 MI_REQ SHEET7 DIGITAL PWB ASS'Y (16/16) TVLINKIN OLLC09109 OLLC09109 OLLC09109 OLLC09109 OLLC09109 R7319 MECA_SW SHEET7,12,19,21 CN0ID OPEN OPEN OPEN OPEN OPEN MECA_SW R7320 KEY1 CN0MI OPEN OPEN...
  • Page 51 POWER POWER PWB CIRCUIT DIAGRAM (1/2) SHEET 23 SUB POWER PWB CN900D (SHEET31) CN000D QGA7901C1-02 Y9001 POWER PWB ASS'Y (1/2) OPEN C9002 Y9002 QFZ9072-105 F9001 OPEN QMF5AD2-6R3-J1 SFL-9041A-M2 R9006 CN0PW LF9001 LF9002 LF9003 QGA7901C1-02 POWER CORD VA9001 QAF0060-621 L9501 QQR1468-001 H9502 LC33293-001A C9001...
  • Page 52 POWER PWB CIRCUIT DIAGRAM (2/2) SHEET 24 LCD PANEL UNIT OPEN CN00Q CN00P QGA2001F6-10X GND5 K9557 NQR0499-002X POWER PWB ASS'Y (2/2) C9561 L9551 OPEN K9556 CP9551 NQR0499-002X D9555 GND5 K9552 NQR0499-002X SFL-9041A-M2 Y9551 Y9552 QUY360-100H QUY360-100H K9553 T9501 NQR0499-002X GND4 C9557 R9552 D9558...
  • Page 53 LED PWB CIRCUIT DIAGRAM SHEET 25 SW PWB CIRCUIT DIAGRAM SHEET 26 LED PWB ASS'Y SW PWB ASS'Y SFL-8702A-M2 SFL-7203A-M2 S7707 CN100R QSW1131-001Z QGA1217C1-09X R8725 R8717 R8716 R8715 R8714 R8713 R8712 R8711 CN100U C7701 OPEN ANALOG PWB Q8706 S7703 S7702 S7701 Q8702 QSW1131-001Z...
  • Page 54 D-AMP PWB CIRCUIT DIAGRAM SHEET 27 D-AMP PWB ASS'Y IC6201 SFL-6201A-M2 PQ20WZ11-X AU_+VCC VCC12V Y6202 Y6201 R6206 OPEN AU_-VCC AU_+VCC QETN1EM-477Z D6201 C6685 1SS355-X C6204 CN10F K6601 C6684 QGA2001C6-04X NQR0499-002X R6201 R6203 SUB POWER PWB ASS'Y C6201 C6202 R6205 C6205 K6602 CN900F 0.01...
  • Page 55 CARD PWB CIRCUIT DIAGRAM (1/2) SHEET 28 ANALOG PWB ASS'Y(1/6) CNCV2 (SHEET1) 3.3V 3.3V IC1202 RST_ETC SN74LVC1G04V-X IC1005 RPI-352 R1231 R1012 LD[0-15] R1232 LA[0-21]_RSEL C1205 IC1203 SN74LVC1G08V-X R1013 C1206 3.3V OLLC07716 OLLC07716-02 OLLC07716-03 R1233 SA16M90TFIR1D03 S A16M90TFIR1D03 SA16M90TFIR1D08 IC1501 CN8CV2 3.3V QGA1501F4-04W SHEET29...
  • Page 56 CARD PWB CIRCUIT DIAGRAM (2/2) SHEET 29 Y/PB/PR[0-7]_DCLK Y/PB/PR[0-7]_DCLK 3.3V CN2004 3.3V OPEN K2003 K2004 CORE CORE K2002 CORE C2004 NCB31HK-102X HSYNC R2007 4.7k HSYNC C2003 VSYNC NCJ41CK-226X-U R2008 4.7k VSYNC PCLK2X R2009 4.7k SHEET28 PCLK2X R2040 YUV7 R2010 4.7k YUV7 YUV6 YUV6...
  • Page 57 DC-DC PWB CIRCUIT DIAGRAM SHEET 30 DC-DC PWB ASS'Y SFL-9141A-M2 CNCV3 CARD PWB ASS'Y(2/2) R9611 CN8CV3 (SHEET29) Q9904 CN00Y OPEN C9608 OPEN 0.0033 R9925 R9603 5.6k R9609 C9606 R9926 C9607 0.0022 Q9905 CN00B L9602 IC9601 C9609 D9604 R9601 MP1593DN-X NQLC8CM-150X OPEN PTZ6.8B-X C9911...
  • Page 58 SUB POWER PWB CIRCUIT DIAGRAM SHEET 31 L9053 SUB POWER PWB ASS'Y OPEN CN900D POWER PWB QGA3901C1-02 ASS'Y(1/2) SFL-9705A-M2 CN00D R9021 QRF074K-3R3 (SHEET23) C9024 QFZ9075-224 C9903 OPEN C9021 C9022 OPEN OPEN GND6 C9901 QCZ9071-471 D9021 D2SBA60 GND3 GND2 D9022 FR105GT-T3 C9050 OPEN CN900F...
  • Page 59 SD CARD PWB CIRCUIT DIAGRAM SHEET 32 VDD3 VDD5 D2102 D2101 LC2001 OPEN OPEN NQR0483-006X SD CARD PWB ASS'Y CN200L VDD3 VDD5 QGA1217F1-08X SFL-1302A-M2 R2103 OPEN SD_RESET L2001 SD_INT R2003 DATAN ATSC TUNER MODULE DATAP NQR0603-002X C2008 R2007 C2006 C2007 C2009 CN2103 OPEN...
  • Page 60 PATTERN DIAGRAMS ANALOG PWB PATTERN [PARTS SIDE] ANALOG PWB PATTERN [SOLDER SIDE] (No.YA363)2-69 2-70(No.YA363)
  • Page 61 DIGITAL PWB PATTERN [SOLDER SIDE] (No.YA363)2-71 2-72(No.YA363)
  • Page 62 DIGITAL PWB PATTERN [PARTS SIDE] (No.YA363)2-73 2-74(No.YA363)
  • Page 63 POWER PWB PATTERN [SOLDER SIDE] POWER PWB PATTERN [PARTS SIDE] C9553 C9551 Q9221 D9563 C9221 C9560 C9563 D9559 C9221 D9560 C9551 C9553 C9560 L9553 C9563 R9226 C9559 R9225 R9224 R9221 D9221 R9553 C9557 C9559 R9552 R9565 C9557 D9554 C9552 R9552 R9565 C9552 R9566...
  • Page 64 CARD PWB PATTERN [SOLDER SIDE] DC-DC PWB PATTERN [SOLDER SIDE] X1001 IC1002 TP2001 TP2015 IC1007 Q2201 C2004 K2001 TP2002 TP2014 R1065 C2016 K2002 C1202 C2001 C1201 IC9902 R1225 C1011 C1008 C1007 C1006 C1016 C1005 C1012 K2004 C1203 D9651 D9655 K2003 K1003 IC2001 Q1201...
  • Page 65 SUB POWER PWB PATTERN [SOLDER SIDE] SUB POWER PWB PATTERN [PARTS SIDE] H9001 R9050 R9071 (No.YA363)2-79 2-80(No.YA363)
  • Page 66 D-AMP PWB PATTERN [SOLDER SIDE] LED PWB PATTERN [SOLDER SIDE] Q8706 D8712 D8705 R8725 D8711 R8720 D8710 Q8710 R8719 R8721 R6669 C6672 Q8709 D8706 Q8708 C6664 Q8703 LED PWB PATTERN [PARTS SIDE] C8751 R8755 D8705 CN100U D8701 C6687 C6666 C6674 C6685 R6667 SW PWB PATTERN [SOLDER SIDE]...

  • Page 67: Parts List

    PARTS LIST Preliminary CAUTION The parts identified by the symbol are important for the safety . Whenever replacing these parts, be sure to use specified ones to secure the  safety. The parts not indicated in this Parts List and those which are filled with lines --- in the Parts No. columns will not be supplied. P.W.

  • Page 68: Table Of Contents

    CONTENTS USING P.W. BOARD & REMOTE CONTROL UNIT ....................3-3 EXPLODED VIEW PARTS LIST -1 ..........................3-4 EXPLODED VIEW -1 ..............................3-5 EXPLODED VIEW PARTS LIST -2 ..........................3-6 EXPLODED VIEW -2 ..............................3-7 PRINTED WIRING BOARD PARTS LIST ........................3-8 ANALOG P.W.

  • Page 69: Using P.w. Board & Remote Control Unit

    USING P.W. BOARD & REMOTE CONTROL UNIT P.W.B ASS'Y name P.W.B ASS'Y No. ANALOG P.W.B SFL-1211A-M2 SD-CARD P.W.B SFL-1302A-M2 D-AMP P.W.B SFL-6201A-M2 SW P.W.B SFL-7203A-M2 CARD P.W.B SRP-8511A-M2 LED P.W.B SFL-8702A-M2 POWER P.W.B SFL-9041A-M2 DC-DC P.W.B SFL-9141A-M2 SUB POWER P.W.B SFL-9705A-M2 DIGITAL P.W.B SFL0D151A-M2...

  • Page 70: Exploded View Parts List

    EXPLODED VIEW PARTS LIST -1  Ref.No. Part No. Part Name Description Local  101 LC12550-001A-0K JACK COVER LC32925-001A-A LICENSE LABEL LC42377-001A-C STAND BASE UNIT QYSPSPD5016MA SCREW M5 x 16mm(x2) QYSPSPD5020ZA SCREW M5 x 20mm(x2) LC42378-001A-C SUPPORT UNIT Inc.106A/106B 106A T0148-01 STAND COVER 106B...
  • Page 71 EXPLODED VIEW -1 106B 106A 106B 108C 108A 108B SHIELD COVER BACK BRACKET DIGITAL PWB BRACKET D-AMP PWB BRACKET SHIELD BASE FRONT (No.YA363)3-5...
  • Page 72 EXPLODED VIEW PARTS LIST -2  Ref.No. Part No. Part Name Description Local  151 QLD0398-001-JIM LCD PANEL UNIT WJW0038-001A-E DIGITAL(LVDS) CABLE WJZ0181-001B-E E-HARNESS ASSY LC41913-006A-C SPEAKER ASSY LEFT LC41458-002A TAPPING SCREW (x6) LC41913-005A-C SPEAKER ASSY RIGHT  157 LC12197-003A-0K FRONT PANEL ASSY LC33125-001B-HK LED LENS...

  • Page 73: Exploded View

    EXPLODED VIEW -2 CARD PWB SHIELD MAIN BASE BOTTOM FRAME TOP FRAME CARD PWB BRACKET FRONT (No.YA363)3-7...

  • Page 74: Printed Wiring Board Parts List

    PRINTED WIRING BOARD PARTS LIST ANALOG P.W. BOARD ASS'Y (SFL-1211A-M2) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C117 NCB31CK-104X C CAPACITOR 0.1uF 16V K C118 NCB31CK-105X C CAPACITOR 1uF 16V K IC101 R2S11004FT C119...
  • Page 75 Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C383 NCB31AK-105X C CAPACITOR 1uF 10V K C761 NEHL1AM-107X E CAPACITOR 100uF 10V M C401 NCB31HK-103X C CAPACITOR 0.01uF 50V K C904 NCB11AK-106X C CAPACITOR 10uF 10V K C402 NCB21AK-225X...
  • Page 76 Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R195 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W J R442 NRSA63J-471X MG RESISTOR 470Ω 1/16W J R197 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W J R443 NRSA63J-102X MG RESISTOR 1kΩ...

  • Page 77: Sd-Card P.w. Board Ass'y (Sfl-1302A-M)

    Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local J401 QNZ0726-001 AV JACK INPUT-1(S/V/L/R) C6502 NENA1CM-475X BP E CAPACITOR 4.7uF 16V M J402 QNN0650-001 PIN JACK INPUT-1(COMPONENT) C6503 NDC31HJ-100X C CAPACITOR 10pF 50V J J403 QNZ0726-001 AV JACK...

  • Page 78: Sw P.w. Board Ass'y (Sfl-7203A-M)

    Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R6671 NRSA63J-103X MG RESISTOR 10kΩ 1/16W J D1204 MA111-X SI DIODE R6673 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W J D2201 PTZ3.9B-X Z DIODE R6674 NRSA63J-472X MG RESISTOR 4.7kΩ...
  • Page 79 Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C2206 NCB31HK-222X C CAPACITOR 2200pF 50V K R1248 NRSA63J-683X MG RESISTOR 68kΩ 1/16W J C2208 NCB31CK-103X C CAPACITOR 0.01uF 16V K R1301 NRSA63J-103X MG RESISTOR 10kΩ...

  • Page 80: Led P.w. Board Ass'y (Sfl-8702A-M)

    Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local L2001 NQL092K-1R0X COIL 1uH K Q9508 UN2212-X DIGI TRANSISTOR L2002 NQL092K-1R0X COIL 1uH K Q9531 2SC3928A/QR/-X TRANSISTOR L2003 NQL092K-1R0X COIL 1uH K Q9532 2SB1188/QR/-W TRANSISTOR L2201 NQL98EM-150X...

  • Page 81: Dc-Dc P.w. Board Ass'y (Sfl-9141A-M)

    Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C9552 QECQ1VM-128 E CAPACITOR 1200uF 35V M R9559 NRSA63D-392X MG RESISTOR 3.9kΩ 1/16W D C9553 QECQ1VM-128 E CAPACITOR 1200uF 35V M R9560 NRSA63J-182X MG RESISTOR 1.8kΩ...

  • Page 82: Digital P.w. Board Ass'y (Sfl0D151A-M)

    Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C9659 QCZ0397-106Z C CAPACITOR 10uF 25V M C9001 QEZ0169-337 E CAPACITOR 330uF C9660 NBZ0008-107X SP E CAPACITOR 100uF 6.3V M C9002 QFP32JK-332 PP CAPACITOR 3300pF 630V K C9661 QCZ0396-226Z...
  • Page 83 Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local IC7606 MM1673XN-X C6250 NCB11AK-106X C CAPACITOR 10uF 10V K IC9001 MP2263DN-C053-X C6251 NCB31CK-104X C CAPACITOR 0.1uF 16V K IC9101 MM1662FT-X C6252 NCB11AK-106X C CAPACITOR 10uF 10V K IC9201 MP2263DN-C053-X...
  • Page 84 Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C6610 NCF31CZ-104X C CAPACITOR 0.1uF 16V Z C6924 NCB31CK-104X C CAPACITOR 0.1uF 16V K C6611 NCF31CZ-104X C CAPACITOR 0.1uF 16V Z C6925 NCB11AK-106X C CAPACITOR 10uF 10V K C6612 NCF31CZ-104X...
  • Page 85 Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C9207 NCB31HK-153X C CAPACITOR 0.015uF 50V K R6257 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W J C9208 NCJ41CK-226X-U C CAPACITOR 22mF 16V K R6258 NRSA63J-151X MG RESISTOR 150Ω...
  • Page 86 Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R6712 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W J R7203 NRSA63J-473X MG RESISTOR 47kΩ 1/16W J R6713 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W J R7207 NRSA63J-101X MG RESISTOR 100Ω...

  • Page 87: Remote Control Unit Parts List (Rm-C14G-1H)

    Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R9510 NRSA63J-104X MG RESISTOR 100kΩ 1/16W J L6514 NRZ0034-0R0W NET RESISTOR 0Ω 1/32W J x4 RA6001 NRZ0080-0R0X NET RESISTOR 0Ω 1/16W J L6515 NRZ0034-0R0W NET RESISTOR 0Ω...
  • Page 88 PACKING 3-22(No.YA363)

  • Page 89: Packing Parts List

    PACKING PARTS LIST  Ref.No. Part No. Part Name Description Local LC21941-001B-A PACKING CASE LC32958-001A JOINT (x4) LC21942-001A-A PACKING CASE BOTTOM LC12626-001A-A CUSION ASSY 4pcs in 1set CP30974-001 POLY BAG LC21927-001B-A ACCESSORY BOX QPA02503505P POLY BAG 25cm x 35cm  008 ------------ WARRANTY CARD BT-52006-2Q...
  • Page 90 LCD Flat Television Users Guide For Model: LT-40FH96 Illustration of LT-40FH96 and RM-C14G Important Note: In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide.
  • Page 91 5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover. Changes or modifications not approved by JVC could void the warranty. * When you don’t use this TV set for a long period of time, be sure to disconnect both the power plug from the AC outlet and antenna for your safety.
  • Page 92 This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
  • Page 93 Your panel display can be wall mounted. If you choose to mount it on a wall, an optional mounting plate (model TS-C180B6), and wall mounting bracket (model PRF-100 made by Premier), should be used. Both parts are available from our Parts & Service Center. You may call 1(800) 882-2345 or visit JVC accessory store at www.jvc.com.
  • Page 94 Warnings Avoiding Ghost Images Displaying fi xed images for extended periods of time can leave a subtle but temporary ghost image on your screen. To avoid this, mix your viewing pattern. Examples include, but are not limited to the following: For example...
  • Page 95 Warnings (Continued...) How to move the cabinet Your fingers may become trapped under The TV may fall causing injuries. Hold the the TV, causing injuries. Hold the TV at the bottom of the stand with your hand and tilt bottom in the middle, and do not allow the TV the TV up or down.
  • Page 96 Table of Contents Important Safety Precautions . 2 Sound Adjust ..57 Sound Settings ... . . 57 Warnings ... . 5 Adjust Sound Settings .
  • Page 97 Table of Contents Digital Setup ..71 Digital Setup ... . . 71 Antenna Level ... . . 71 Digital Sound .

  • Page 98: Unpacking Your Tv

    Quick Setup Unpacking your TV Thank you for your purchase of a JVC LCD Flat Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include:...
  • Page 99 Quick Setup TV Models NOTE: Before you connect your television to another device, please refer to the proper diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television.

  • Page 100: Tv Remote Control

    Quick Setup TV Remote Control POWER TV CATV VCR DVD ASPECT MULTI SCREEN TWIN INDEX SELECT SLEEP FREEZE SWAP ML/MTS DISPLAY INPUT i.LINK MENU RETURN+ TIMER TUNE THEATER VIDEO FAVORITE STATUS CHANNEL NATURAL SOUND CINEMA LIGHT C.C. MUTING GUIDE MENU BACK VCR CHANNEL VCR DVD...
  • Page 101 Quick Setup Getting Started Getting Started These quick setup pages will provide you, in four easy steps, with the basic information you need to begin using your new television right away. If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual.
  • Page 102 To move rapidly through the channels using JVC’s Hyperscan feature, press and hold CH+ or CH –. The channels will zip by at a rate of five channels per second. The right and left buttons will turn the volume up or down.

  • Page 103: Quick Setup

    Quick Setup Connections Step 3 - Connecting your devices To make these connections, you will use plugs like the ones illustrated below. S-Video Cable Component Cables Composite Cables Audio Cables Used to make video connections with S-Video VCRs, Camcorders and DVD Used to connect audio/video players.

  • Page 104: Vcr Connection

    Quick Setup Connections VCR Connection Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables.
  • Page 105 Quick Setup Connections Diagram #2 Cable or Antenna Output Two-Way Splitter OUT OUT Two-Way Splitter (Attachment) OUT OUT Coaxial Cable (Attachment) TV Rear Panel Green Blue AUDIO OUT DVD Player (OPTIONAL)

  • Page 106: Connecting To A Camcorder

    Quick Setup Connections Connecting to a Camcorder You can connect a camcorder to you televison by using the input jacks located on the back of the television. TV Rear Panel CAMCORDER 1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on the back of the TV, OR connect an S-Video cable from the camcorder to the back of the TV.

  • Page 107: Connecting To An External Amplifier

    Quick Setup Connections Connecting to an External Amplifier TV Rear Panel Speaker Speaker Amplifier 1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the LEFT AUDIO INPUT on the amplifier. 2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the RIGHT AUDIO INPUT on the amplifier.

  • Page 108: V1 Smart Input

    Quick Setup Connections Connecting to an AV Receiver using your television's V1 Smart Input By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture sources from many different devices, without having to change or use the other input connections on your TV.

  • Page 109: Connecting To A Digital Tv Receiver

    Quick Setup Connections Connecting to a Digital TV Receiver By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in their digital form. DTV Decoder TV Rear Panel DIGITAL OUT AUDIO OUT TV Rear Panel HDMI to DVI Cable After the connections have been made, tighten the screw to secure the cables.
  • Page 110 Quick Setup Connections Connecting to a HDMI Compatible Device By connecting a HDMI compatible device, high definition pictures can be displayed on your TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI compatible device. HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all digital audio/video interface.
  • Page 111 Quick Setup Connections Connecting to an amplifier using your optical output You can connect an amplifier that has an optical digital input terminal by using an optical digital cable from the optical output. The signal that is output can be PCM or Dolby Digital. Television Rear Panel Amplifier 1) Connect the optical cable from underneath the television to the back of the amplifier.
  • Page 112 Setup, the video signal you are recording or playing back may stop or you may not be able to perform the Digital Auto Tuner Setup. • Your television can connect with i.LINK D-VHS decks and HD-Camcorders (JVC brand only). If you connect other brand devices, with i.LINK cable, they will not work.

  • Page 113: Connecting To The Computer

    Quick Setup Connections Connecting to the computer This TV can be used as a computer screen. Use a commercially available D-SUB cable to connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. If you want to listen to the sound from the computer, use a commercially available RCA cable to connect the INPUT-3 audio input terminal to the computer's audio output terminal.

  • Page 114: Table Of Signals For Each Type Of Computer

    Quick Setup Connections Table of signals for each type of computer Resolution Vertical Horizontal Frequency Frequency (Hz) (kHz) 640 x 480 60.0 31.5 (VGA) 1024 x 768 60.0 48.4 (XGA) • Only the above formats are supported. • Even with the above formats at 60 Hz, some problems may be experienced depending on the quality of the synchronous signal.
  • Page 115 • If you press the Menu button while setting up the interactive plug-in menu, it will skip over it. Language After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically switches to the LANGUAGE settings. You can choose to view your onscreen menus in three languages: English, French (Français) or Spanish (Español).

  • Page 116: Auto Clock Set

    Quick Setup Plug-In Menu Auto Clock Set Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most public analog broadcasting stations. If you do not have this in your area, you will have to set the clock manually.

  • Page 117: Auto Tuner Setup

    You can now begin watching your television, or you can continue on in this guide for more information on programming your remote control, or using the JVC onscreen menu system to customize your television viewing experience. Notes: •...
  • Page 118 Remote Programming Setting the CATV, VCR and DVD Codes You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer.
  • Page 119 Remote Programming VCR Codes The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”. 3) Press and hold down the D button, then enter the first code number listed with the 10 ISPLAY...
  • Page 120 Remote Programming DVD Codes The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward, rewind, previous/next chapter, tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”. 3) Press and hold down the D button, then enter the first code number listed with the 10 ISPLAY...
  • Page 121 Remote Programming Search Codes Cable/Satellite Search Codes Function 1) Slide the first 2-Way Mode Selector switch to CATV. 2) Press the P and R +/TV buttons. Hold for at least three seconds and release. OWER ETURN 3) Press the P button on the remote, and see if the cable or satellite box responds.
  • Page 122 Onscreen Menus Using the Guide Certain symbols are used throughout this guide to help you learn about the features of your new television. The ones you will see most frequently are: π † Up and Down arrows mean press the C + or C –...
  • Page 123 Onscreen Menus The Onscreen Menu System Your television comes with JVC’s onscreen menu system. The onscreen menus let you make adjustments to your television’s operation simply and quickly. Examples of the onscreen menus are shown on the next page. Detailed explanations on using each menu follow later in this guide.

  • Page 124: Initial Setup

    Onscreen Menus Press the M button INITIAL SETUP INITIAL SETUP INITIAL SETUP PREVIOUS PREVIOUS PREVIOUS AUTO TUNER SETUP NOISE MUTING ILLUMINATION CHANNEL SUMMARY FRONT PANEL LOCK LANGUAGE ENG. FRAN. ESP. V-CHIP V1 SMART INPUT CLOSED CAPTION SET LOCK CODE VIDEO INPUT LABEL AUTO SHUT OFF POSITION ADJUSTMENT XDS ID...
  • Page 125 Initial Setup Auto Tuner Setup The auto tuner setup function is described on page 28 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below. Press the M button AUTO TUNER SETUP To AUTO TUNER SETUP IN ANALOG π...
  • Page 126 Initial Setup Channel Summary Channel summary allows you to customize the line-up of channels received by your TV. Regarding analog channels, you can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 191 channels. Regarding digital channels, the only channels that will appear are the ones that are broadcasting.
  • Page 127 Initial Setup How to set the channel label. (This is only for analog broadcasting.) Press the M button To CHANNEL SUMMARY π † √® To operate CHANNEL 09 To the ID column π † RESET Press the O button to enter √®...
  • Page 128 Initial Setup Channel Guard Message When a viewer attempts to watch a guarded channel, the following message appears: To watch a channel that you have locked, enter the THIS CHANNEL IS LOCKED BY Lock Code using the 10 key pad. CHANNEL GUARD.

  • Page 129: Unrated Programs

    Initial Setup Unrated Programs Unrated programming refers to any programming which does not contain a rating signal. Programming on television stations which do not broadcast rating signals will be placed in the “Unrated Programming” category. Examples of Unrated programs: • Emergency Bulletins •...
  • Page 130 Initial Setup US V-Chip Ratings U.S. PARENTAL RATING SYSTEMS Programs with the following ratings are appropriate for children. ❒ TV Y is Appropriate for All Children Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6.

  • Page 131: Setting Us V-Chip Ratings

    Initial Setup Setting US V-Chip Ratings Press the M button V-CHIP To V-CHIP V-CHIP π † SET US TV RATINGS √® To operate (lock icon appears) SET MOVIE RATINGS SET CANADIAN RATINGS ENG Press Z to access the V-Chip menu SET CANADIAN RATINGS FRE √®...

  • Page 132: Directions To Set Movie (Mpaa) Ratings

    Initial Setup Movies Ratings ❒ NR – Not Rated This is a film which has no rating. In many cases these films were imported from countries which do not use the MPAA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released.

  • Page 133: Directions To Set Canadian V-Chip Ratings

    Initial Setup Canadian V-Chip Ratings ❒ E – Exempt Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. ❒ C – Programming Intended for Children Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or unrealistic in nature.
  • Page 134 Initial Setup Set Lock Code Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes preset with a lock code of “0000”. You may change the code to any four-digit number you wish. To change the lock code, follow the steps below. Press the M button SET LOCK CODE...
  • Page 135 Initial Setup Illumination The illumination feature allows you to adjust the brightness of the light on the front of the television. When you turn the power on the televison, the front panel light remains on when illumination is set to LOW or HIGH. Press the Menu button INITIAL SETUP To ILLUMINATION...
  • Page 136 Initial Setup Closed Caption Many broadcasts now include an onscreen display of dialog called closed captions. Some broadcasts may also include displays of additional information in text form. Your television can access and display this information using the closed caption feature. To activate the closed caption feature, follow the steps below.
  • Page 137 Initial Setup Digital Manual Setting Press the M button Digital Closed Caption > Appearance Preview To CLOSED CAPTION π † Closed Caption Sample √® To enter Appearance Mode Manual To Type π † Font √® To select Auto, Advanced or Basic Colors To Service π...
  • Page 138 Initial Setup Auto Shut Off This function automatically shuts off your TV when there is no signal from the channel the TV is on. Press the M button INITIAL SETUP PREVIOUS To AUTO SHUT OFF π † ILLUMINATION √® To turn ON or OFF LANGUAGE ENG.
  • Page 139 Initial Setup Noise Muting This feature inserts a blank grey screen over channels which are not broadcasting or are too weak to be received clearly. Press the M button INITIAL SETUP PREVIOUS To NOISE MUTING π † NOISE MUTING √® To turn noise muting ON or OFF FRONT PANEL LOCK V1 SMART INPUT...
  • Page 140 Initial Setup V1 Smart Input This feature is used if you have connected an AV Receiver to your television. By turning this feature on, your television can automatically detect the signal source from your components that are connected to your AV Receiver. Press the M button INITIAL SETUP...
  • Page 141 Initial Setup Position Adjustment Position adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to panorama or cinema. Press the M button To POSITION ADJUSTMENT π † √® To enter √®...
  • Page 142 Initial Setup Digital-In The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p picture signal is being displayed on the screen. There are two types of 480p picture signals: 640x480 and 720x480.
  • Page 143 Picture Adjust Picture Settings These settings allow you to change and adjust the way the picture appears on your television. TINT Tint allows you to adjust the levels of red and green in your TV picture. COLOR The color function lets you make all the colors in the TV picture appear either more vivid or subtle.
  • Page 144 Dynamic Gamma JVC's Dynamic Gamma Circuitry (DGC makes it easier to see dark areas when a picture has many dark areas, and makes it easier to see the bright areas when a picture has many bright areas. DGC is turned on, DGC analyzes and adjusts the total level of picture brightness...
  • Page 145 Picture Adjust Digital VNR This function can be selected to change the effect of Digital NR. Press the M button To DIGITAL VNR DIGITAL VNR π † √® To enter AUTO To select the effect you like. π † AUTO: adjusts the effect of VNR automatically. MIN: adjusts the effect of VNR to minimum.
  • Page 146 Sound Adjust Sound Settings These settings allow you to change and adjust the sound on your television. BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with the bass adjustment. TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio. BALANCE –...
  • Page 147 Clock/Timers Set Clock The set clock function is described on page 27 as the interactive plug-in menu. You can choose to set the clock automatically or manually. If you need to set the clock again, follow the steps below. Press the M button To SET CLOCK π...
  • Page 148 Clock/Timers On/Off Timer The on/off timer lets you program your television to turn itself on or off. You can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you’re not home.
  • Page 149 Button Functions Multi Screen Function Your television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels). Note: After you press any multiscreen button, if you press the menu button, only the picture adjust screen will appear. Twin Activate the split-screen option by pressing Twin on the remote control.
  • Page 150 Button Functions Index This allows you to quickly look at up to 12 channels at a time so that you can decide which one to watch. Notes: • Only RF input signal will be displayed. • You can watch the channel added in channel summary. See page 37. Freeze Pressing the F button causes the screen to change to the split-screen display with the still...
  • Page 151 Button Functions Power Turns the TV on or off. Press the P button OWER Note: • When you press the power button on the TV, and you are tuned to a digital channel or i.Link, "NOW WARMING UP... PLEASE WAIT" appears on the screen. It takes a little while to warm Number Buttons - 10Key Pad Use the number buttons on the remote control to move directly to a specific channel.
  • Page 152 Button Functions Return +/TV The R +/TV button has three functions: ETURN Return - Returns to the channel viewed just before the channel currently onscreen. Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH–...
  • Page 153 Button Functions Muting The M button instantly turns the volume down completely when you press it. Press UTING and the volume level will instantly go to zero. To restore the volume to its previous UTING level, press M again. UTING Video Status The V button gives you a choice of four TV picture display settings, including a...
  • Page 154 Button Functions Sleep Timer The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals of 15 minutes, for a total time of up to 180 minutes. Press the S button LEEP 0 15 30 45 60 75 90 105 120 135 150 165 180 Sleep Timer Message...
  • Page 155 Button Functions Display The display screen shows the current status of timers, inputs and XDS ID. Press the D button ISPLAY The screen to the right shows the following information: 05 KLVX PBS JAZZ FESTIVAL • The current channel or AV input (Channel 05) 12:20 PM •...
  • Page 156 Button Functions Favorite The Favorite button allows you to select your favorite channels easily. First, you must register the channels that you like. See how to register below. Press the F button AVORITE FAVORITE The favorite channel list will appear. PREVIOUS To select the channel you want to watch π...

  • Page 157: Aspect Ratios

    Button Functions Aspect This feature will help you adjust the picture you are watching to give you the best possible picture quality. Aspect Ratios PANORAMA - With this ratio a normal REGULAR - The regular ratio is used 4:3 aspect picture is stretched to fit the when you want to watch a 4:3 broadcast dimensions of the 16:9 aspect screen.
  • Page 158 • If you are in Media Card Viewer mode, Aspect can not be used. Menu The M button allows you to access JVC’s onscreen menu system. Press M to activate the onscreen menu system. • See individual topics like “Sound Adjust” for specific information on using menus.
  • Page 159 VCR, please see the code chart and instructions on page 30. • The remote is preset with the code 000 to control JVC-brand DVD players. For any other manufacturer’s brand DVD player, please see the code chart and instructions on page 31.

  • Page 160: Digital Setup

    Digital Setup Digital Setup Use this function when you are receiving a digital broadcast. Press the M button Digital Setup To DIGITAL SETUP π † Antenna Level √® To enter Digital Sound Aspect Ratio The onscreen will appear Cable Card Application Notes: i.LINK Auto Play Software Update...

  • Page 161: Digital Sound

    Digital Setup Digital Sound You can select the optical digital sound output, either PCM or Dolby Digital when your TV is connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can enjoy listening in 5.1ch sound when watching digital broadcasts. Press the M button To DIGITAL SETUP...

  • Page 162: Cable Card Application

    Digital Setup Cable Card Application Press the M button To DIGITAL SETUP π † √® To enter To Cable Card Application π † √® To enter Press the O button The application will perform i.LINK Auto Play When playing a D-VHS tape, you can set it to the i.LINK input automatically, or manually. Press the M button To DIGITAL SETUP...

  • Page 163: Digital Button Functions

    Digital Button Functions Digital CH D/A (Digital/Analog) The D/A button changes the analog and digital channel. Each time you press the D/A button, you can switch back and forth the analog and digital channels. Digital channels have a "D" in front of the channel number.

  • Page 164: I.link Menu

    Digital Button Functions i.LINK Menu i.LINK has two menus - Controller and Device. By connecting a D-VHS VCR with an i.LINK cable, you can set the timer easily. Notes: • The i.LINK/Timer function will only work when you are receiving digital programming only. •...

  • Page 165: Device

    Digital Button Functions Device To operate, select a device. i.LINK Controller Renumber Device Page 2/3 D-VHS1 HM-DH30000U D-VHS2 HM-DH40000U HD-MOVIE 1 GR-HD1 To select your device connecting with i.LINK π † Press the OK button Notes: • If you do not select the device, you cannot use the i.LINK timer functions. •...

  • Page 166: Timer

    Digital Button Functions Timer You can set the two timers: Record and view. The timer starts the recording or turns to the channel you set for it automatically. Reservation Press the T button IMER To New Reservation π † Press the O button New Reservation Timer...

  • Page 167: Timer Edit

    Digital Button Functions Timer Edit When you want to confirm the timer you set or edited, or delete the timer setting, use this function. Timer Edition Press the T button IMER To select the timer list you want to edit π...

  • Page 168: Guide

    Digital Button Functions Cancel the timer recording When you record a digital program now, you can cancel the recording. Press the T button IMER Timer Sep. 10 (Wed) 4:55PM To select the timer list you want to cancel π † Page 1/1 the recording New Reservation...

  • Page 169: Media Card Viewer

    JVC shall not provide any compensation for any lost content. • SM Card (Smart Media Card) is not supported. • CF Card and removable microdrive Hard Disk for JVC "Everio" camera is a type of CF Card compliant with CF+ Type II.

  • Page 170: How To Insert Media Card

    Media Card Viewer How to insert Media Card Before you insert a media card into the card slot, open the door on the left side panel and make sure of the slot type and the direction to insert the card as illustrated. To access, gently push the "PUSH-OPEN"...

  • Page 171: How To Operate Media Card Viewer

    Media Card Viewer How to operate Media Card Viewer Press the M button SELECT CARD, AND PRESS OK To MEDIA CARD VIEWER π † √® SD Card To enter To select SD Card or COMPACT FLASH π † COMPACT FLASH card If you only have one media card inserted in the card slot, this menu will not appear.

  • Page 172: Photo

    Media Card Viewer PHOTO √® Select PHOTO Press the O button The right nine images appear. √® To select an image that you like π † Press the O button The slide show starts. Notes: • To stop the slide show, press the B button.

  • Page 173: File

    • You may not be able to replay audio on some fi les created or edited with "CyberLink DVD Solution" software (provided with some JVC digital cameras). This will depend upon the way in which the fi les were created or edited and is not a malfunction of the TV.

  • Page 174: Operation Note

    Media Card Viewer Operation Note Operation of the CH+ and CH- keys is different for slideshows started from the PHOTO/VIDEO icon and for slideshows started from the FILE icon. 1) When you select VIDEO icon and play the video, press the following buttons: CH+ : Fast-Forward CH- : Rewinding VOL+ : Up volume...

  • Page 175: Specifications For Media Card Viewer

    Media Card Viewer Specifications 1) Supported card media CF type Memory xD-Picture Card Media CompactFlash Microdrive Memory Stick Card Hard Disk Card √ √ MPEG2-PS MPEG4 √ √ √ √ √ JPEG √ √ √ √ √ 2) Supported fi le systems (1) FAT16 (2) FAT32 (3) VFAT...

  • Page 176: Osd Information

    OSD Information Weak Signal This OSD warning appears when the digital channel that you have selected is too weak to receive or no signal is being detected for that channel. Weak Signal No Program If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM" appears on the television screen.

  • Page 177: Cable Card Information

    Cable Card Information Cable card offers information when a cable card is inserted into the CABLE CARD slot on the back of the television. Notes: • Please contact your local cable company regarding detailed information. • When the cable card is inserted into the cable card slot, if you turned the power off, the fan will continue to rotate because the program information is being renewed.

  • Page 178: Appendices

    Troubleshooting Refer to the table below to check the condition. If you think that there is a problem, contact the JVC Service Center where you purchased the television. PROBLEMS CHECK There is no power • See if the power cord became unplugged.
  • Page 179 Troubleshooting PROBLEMS CHECK Static electricity • It is normal to feel static electricity if you brush or touch the screen. You hear occasional • It is normal for the TV to make crackling sounds when first turned on or off. Unless crackling sounds the sound or picture become abnormal, this is fine.

  • Page 182: Specifications

    Note: The Digital–In terminal is not compatible with picture signals of a personal computer SD Card, MMC, CompactFlash, Readable Cards Removable microdrive Hard Disk for JVC digital media camera "Everio" (a type of CF card), Memory Stick, xD-Picture Card Dimensions (inch/cm) 39 3/8 x 29 x 13...

  • Page 183: Notes

    Notes...
  • Page 184 Notes...
  • Page 185 JVC COMPANY OF AMERICA JVC CANADA, INC. Division of JVC Americas Corp. 21 Finchdene Square 1700 Valley Road Scarborough, Ontario Wayne, New Jersey, 07470 Canada, M1X 1A7...

This manual is also suitable for:

Lt-40fh96/s

Table of Contents