System Setting; Network Setting - JVC LT-40C590 Instruction Manual

5 Customising TV Settings

System Setting

Network Setting

Adjust all your network setting and check your connection if you are having connection problems.
Manual setup is recommended for advanced users only.
1. Press the MENU button to display the Main Menu. Press the
to select the System menu and then press the OK button.
2. Press the buttons to select Network Setting and then press the OK
button to enter the network setting sub-menu.
3. Press the
buttons to select the following
options, and then press the
buttons to adjust each option's setting or the
OK button to select the options.
Configuration
Network Info
Network Test
4. Press the BACK or MENU button to return to the previous menu.
5. Press the EXIT button to return to normal TV viewing.
46
button or 0-9
buttons to select Auto or Manual in Acquire IP Address and Acquire DNS
Press the
Address.
If Manual mode is selected, use the
Default Gateway and DNS Server. Then press the OK button, and use the
0-9 buttons to enter the values.
It also display IP Address and MAC Address in IP Config menu.
Display the network information.
Press to test the network.
buttons
Network
Configuration
Network Info
Network Test
Connected 100 . 148 . 107 . 110
MAC Address A8 A6 48 A8 A6 48
buttons to select IP Address, Subnest Mask,
Main Menu
Picture
Sound
Time
Channel
Option
Lock
System
Main Menu System
Picture Network Setting
Sound PVR File System
Time Software Update
Channel Network Upgrade
Option Standby Scan
Lock First Time Installation
System
IP Configuration
Acquire IP Address
IP Address 100 . 148 . 107 . 110
Subnest Mask 100 . 148 . 107 . 110
Default Gateway 100 . 148 . 107 . 110
Acquire DNS Address
DNS Server 100 . 148 . 107 . 110
buttons and
Off
Auto
Auto