Table of Contents
Advertisement
4
Initial Setup
Target Region Setting (UK only)
During tuning your TV may have received signals from more than one
transmitter. If this has occurred the Target Region Setting screen will be
displayed. This will enable you to select the correct regional transmission for
the local news service that you require.
1. Press the
buttons to select the Country then press the
to select Primary Region / Secondary Region / Tertiary Region.
2. Press the
buttons to select your preferred region then press the OK
button to confirm.
Country Code
Primary Region
Secondary Region
Tertiary Region
Eco Friendly / Auto Standby Function
The latest eco-friendly power saving technology will automatically switch the TV into standby mode if the TV is left on and idle
for 4 hours or it does not receive an input signal for serveral minutes. A reminder screen will pop up and count down before the
switches to standby mode. Once the TV is switched to standby mode, the red LED indicator will illuminate on the front panel of
the TV.
Press the
button on the remote control to turn on your TV. The red LED indicator will turn off and a pop up message will be
prompt on the screen AFTER wake up from standby.
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The
button on the remote control is only used for switching the TV into standby, it does not disconnect the TV from the
mains power. To completely disconnect the mains power, please remove the mains plug from the mains socket.
Selecting the Input Source
1. Press the INPUT button on the remote control to display the Input
source list.
2. Press the
buttons to select the input source that you want: DTV /
ATV / HDMI 1 / HDMI 2 / HDMI 3 / AV / USB.
3. Press the OK button to confirm your selection. If you do not press the OK
button to confirm, the TV will automatically confirm the selected input
source within 4 seconds.
Channel Selection
Press the CH + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.
•
Alternative
Press the LIST button to enter the Channel List. Then use the
Press the OK button to view the selected channel.
If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the
•
channel will then be unlocked (refer to page 44 for details on Block Channel).
Press the FAV button to view the Favourite List. Then use the
•
button to view the selected channel (refer to page 33 for details on Channel Edit).
•
Press the
button to return to the previously viewed channel.
22
This will be shown as GBR for the UK.
This will show the regional country (e.g. England, Wales, Scotland, NI).
This will allow you to set the region for your local news service on BBC and ITV (e.g. London,
Beds and Cambs etc).
You may receive signals from more than one transmitter within the Secondary Region, (e.g
Beds and Cambs may have Luton or Sandy Heath).
Choose Your Prefered Region
Country
Primary Region
Secondary Region
buttons
Tertiary Region
buttons to highlight and select the channel.
buttons to highlight and select the channel. Press the OK
UK
England
London
Cambridge
Confirm
OK
Input Source
DTV
ATV
HDMI 1
HDMI 2
HDMI 3
AV
USB
- Quick Links:
- Connecting to Network
Hide quick links:
Advertisement
Table of Contents
