Function Introduction For Combination Buttons - Viking GWH12UB Owner's Manual

original display. If ON/OFF, MODE, TIMER, SLEEP, COOLING or HEATING button
is pressed during the setting or inquiry procedure, remote controller will also exit
the sleep curve setting.
Sleep 4 is Siesta mode. The set temperature will change automatically according to
the features of siesta.
Sleep function will be disabled if the air condition is restarted after power failure;
when sleep function is turned on, quite fan speed will be also turned on.
Sleep function can not be set in AUTO mode.
17
Wifi button
Press this button 3s can set wifi function on or OFF.
At OFF status,press mode button and wifi button,can reset wifi mode parameter.
and open wifi function.

Function introduction for combination buttons

About X-FAN function
This function indicates that moisture on evaporator of indoor unit will be blowed after
the unit is stopped to avoid mould.
1. Having set X-FAN function on: After turning off the unit by pressing ON/OFF button
indoor fan will continue running for about 2 min. at low speed. In this period, press
X-FAN button to stop indoor fan directly.
2. Having set X-FAN function off: After turning off the unit by pressing ON/OFF button,
the complete unit will be off directly.
About AUTO RUN
When AUTO RUN mode is selected, the setting temperature will not be displayed on
the LCD, the unit will be in accordance with the room temp. automatically to select the
suitable running method and to make ambient comfortable.
About lock
Press + and - buttons simultaneously to lock or unlock the keyboard. If the remote co-
ntroller is locked, the icon
the mark will flicker for three times. If the keyboard is unlocked, the mark will disappear.
About switch between Fahrenheit and Centigrade
Under status of unit off, press MODE and - buttons simultaneously to switch
will be displayed on it, in which case, press any button,
14
and .