Introduction For Buttons On Remote Controller - Viking GWH12UB Owner's Manual

Introduction for buttons on remote controller

Note:
the corresponding button on the remote controller that the unit will keep the
original running status.
After putting through the power
Operation indictor "
conditioner by using remote controller.
Under on status, pressing the button on the remote controller, the signal icon "
on the display of remote controller will bl
out a "de" sound, which means the signal has been sent to the air conditioner.
1
ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the air
conditioner, operation indicator "
The colour is different for dif
2
+/- button
Holding "+" or " - " button, 2s later, set temperature on remote controller will
change quickly.On releasing button after setting is finished, temperature indica-
tor on indoor unit will change accordingly. (Temperature can't be adjusted under
auto mode)
TIMER , press "+" or " - " button to adjust time.
3
Cool button
4
Heat button
5
FAN button
Pressing this button can set fan speed circularly as: low(
medium ( ),medium high(
Note:
The unit operates at low speed under dry and auto dry mode. The speed can't
be adjusted.
AUTO speed, air conditioner will select proper fan speed automatically
according to ambient temperature.
, it could be used for the air conditioners
" is ON (red indicator). After that, you can operate the air
"on indoor unit's display is ON (green indicator.
),high(
Auto
8
),super( ),auto(AUTO),quiet(
n starting sleep fuction.
erature 0.5
) , low medium(
"
),
).