Download Print this page

Safety System - Philips HR2724/00 User Manual

Philips meat mincer hr2724

Advertisement

EN
|
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
Check if the voltage indicated on the appliance corresponds to
the local mains voltage before you connect the appliance.
In order to avoid a hazardous situation, this appliance must never
be connected to a timer switch.
Do not use the appliance if the mains cord, the plug or other
parts are damaged.
If the mains cord is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.
Keep the appliance out of the reach of children.
Never let the appliance run unattended.
Never exceed the maximum operating time of 10 minutes at all
applications.
Always switch the appliance off by pressing the on/off button.
Switch the appliance off and unplug it before detaching any
accessory.
Never immerse the motor unit in water or any other liquid, nor
rinse it under the tap.
Never use your fingers or an object (e.g. a spatula) to push
ingredients into the cutter housing while the appliance is running.
Only the pusher is to be used for this purpose.
Be very careful when handling the cutter unit, especially when
removing it from the worm shaft and during cleaning.The cutting
edges are very sharp!
Never use any accessories or parts from other manufacturers or
that have not been specifically advised by Philips.Your guarantee
will become invalid if such accessories or parts have been used.
Thoroughly clean the parts that will come into contact with food
before you use the appliance for the first time.
Do not clean the metal parts in the dishwasher, as dishwasher
detergents will cause these parts to darken or oxidise. See the
4
Cleaning section (page 22) for instructions on how to clean the
various parts.
This appliance is meant for household use only.
Noise level: Lc = 75 dB [A]

Safety system

This appliance is equipped with a non-resettable, current-sensitive glass
fuse that cuts off the power supply in case of motor failure to prevent
overheating of the appliance.
The appliance is also equipped with mechanical protection.To protect
the motor, the plastic gear has been designed to break if bones or
utensils are fed into the appliance.When this happens, simply remove
the gear and exchange it.
See section Replacement (page 29).
PL
|

Advertisement

loading

This manual is also suitable for:

Hr2724