Table of Contents
Advertisement
Available languages
Available languages
English
Introduction
Introduction
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your product
at www.philips.com/welcome.
Important safety information
Read this important information carefully before you use the appliance and
save it for future reference.
Danger
-
Do not immerse the base and the milk jug in water or any other liquid.
Do not clean them in the dishwasher either.
Warning
-
Check if the voltage indicated on the appliance corresponds to the local
mains voltage before you connect the appliance.
-
Do not use the appliance if the plug, the mains cord or the appliance
itself is damaged.
-
If the mains cord is damaged, you must have it replaced by Philips, a
service center authorized by Philips or similarly qualified persons in order
to avoid a hazard.
-
This appliance can be used by children aged from 8 years and above and
by persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and if they
understand the hazards involved. Cleaning and user maintenance shall not
be made by children unless they are older than 8 and supervised. Keep the
appliance and its cord out of reach of children aged less than 8 years.
-
Children shall not play with the appliance.
-
Only use this appliance for its intended purpose to avoid potential
hazard or injury.
-
Connect the appliance to an earthed wall socket.
-
Do not let the mains cord hang over the edge of the table or worktop on
which the appliance stands.
-
Always disconnect the appliance from the wall socket if you leave it
unattended and before you assemble,disassemble or clean it.
-
Do not let water or a moist cloth come into contact with the connectors
on the base and on the underside of the milk jug.
Caution
-
Never use any accessories or parts from other manufacturers or that
Philips does not specifically recommend. If you use such accessories or
parts, your warranty becomes invalid.
-
Do not remove the coil holder from the spindle as this may cause
damage.
-
Only use the appliance to heat up or froth milk. Do not use it to process
any other ingredients.
-
Do not exceed the maximum level indicated in the milk frother. If you
overfill the milk frother, hot milk may escape from under the lid and
cause scalding.
-
The bottom of the jug is hot if you pour out milk immediately after
heating up or frothing.
-
Do not move the appliance while it is operating, to prevent hot milk from
escaping from under the lid.
-
Correct cleaning of the milk frother is very important for reliable
performance and good frothing results.
-
Always return the appliance to a service center authorized by Philips for
examination or repair. Do not attempt to repair the appliance yourself,
otherwise the warranty becomes invalid.
-
Always place the base and the milk jug on a dry, flat and stable surface.
-
Do not place the appliance on a hot surface and prevent the mains cord
from coming into contact with hot surfaces.
-
Never let the appliance operate unattended.
-
Make sure that the milk frother is switched off before you remove the
milk jug from the base.
-
Do not use the machine in combination with a transformer, as this could
cause hazardous situations.
-
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance. Simply use a soft cloth
dampened with water.
-
This appliance is intended for normal household use only. It is not
intended for use in environments such as staff kitchens of shops, offices,
farms or other work environments. Nor is it intended to be used by
clients in hotels, motels, bed and breakfasts and other residential
environments.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
Ordering accessories
To buy accessories or spare parts, visit www.philips.com/parts-and-
accessories or go to your Philips dealer. You can also contact the Philips
Consumer Care Center in your country (see the international warranty
leaflet for contact details).
Warranty and support
If you need information or support, please visit www.philips.com/support
or read the international warranty leaflet.
Recycling
-
This symbol means that this product shall not be disposed of with
normal household waste (2012/19/EU).
-
Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative
consequences for the environment and human health.
Troubleshooting
This chapter summarizes the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Center in your country.
Troubleshooting
Problem
Possible cause
The light in the
You just prepared hot
button flashes
frothed milk or hot milk
but the appliance
and pressed the button
does not operate.
for milk or hot frothed milk
again without letting the
appliance cool down.
The temperature of the
milk is too high.
The appliance
You have not placed
does not froth.
the lid properly on the
appliance.
You have not
You did not attach the
placed the lid
frothing coil to the coil
properly on the
holder.
appliance.
Attach the
You used a type of milk
frothing coil to the
that is not suitable for
coil holder.
frothing.
The inside of the milk
jug is polluted with milk
residues, which prevents
the coil holder from
rotating.
Milk escapes from
You put too much milk in
under the lid.
the milk jug.
The milk is not
This is normal.
very hot.
Not all milk has
This is normal.
been frothed.
Solution
If you want to prepare hot
frothed milk or hot milk
again, the milk jug needs
to cool down for a few
minutes before you can
use it again. As long as
the milk jug is still hot, the
temperature limiter makes
sure that the appliance
cannot be operated. You
can rinse the inside of the
milk jug with cold water to
let it cool down faster.
Replace the warm milk
with cold milk or let the
appliance cool down.
Place the lid properly.
Attach the frothing coil to
the coil holder.
Many factors can
influence the quality of
the milk froth (like protein
content). If the milk does
not froth as you would
like, try a different type or
brand of milk. Use semi-
skimmed cow's milk at
refrigerator temperature
for the best frothing result.
Clean the coil holder and
the inside of the milk jug.
Do not fill the milk
jug beyond the MAX
indication.
The milk is heated up to
approx 74°C to ensure the
best froth and taste. Milk
proteins start to break
down and burn if the milk
is overheated.
The appliance does not
froth all the milk. The
appliance created the
optimal milk-froth ratio.
The milk easily mixes with
coffee or other beverages
and the milk froth stays
on top for a delicious
head.
Advertisement
Table of Contents
