Advertisement
22
EN
|
Cleaning - tips and warnings
-
Remove any meat left in the cutter housing by passing pieces of
bread through it.
-
Always switch off and unplug the appliance before removing
accessories or cleaning the motor unit.
-
Remove the pusher and the feeding tray.
-
Unscrew the screw ring and remove the grinding disc, the cutter
unit and the worm shaft.
-
Remove the cutter housing by pressing the release button and by
turning the cutter housing to the right (see the Disassembly section,
page 16).
-
The cutter unit and grinding discs should be lightly brushed with fat
or oil to prevent rusting.
-
Do not clean the metal parts in the dishwasher, as dishwasher
detergents will cause these parts to darken or oxidize.
PL
|
Advertisement
