Wired remote controller installation
Initializing your wired remote controller communication
1. Press the Esc and Delete buttons at the same time for more than 5 seconds.
f The communication of your wired remote controller will be initialized, and the device will search for the Hydro unit/Hydro
f
unit HT connected to your wired remote controller again.
Error display on the wired remote controller
❋ ❋ The address of Hydro unit is displayed "200000"
f Error codes for the wired remote controller and the product connected to your wired remote controller will be displayed
f
in the LCD display.
Error indications are displayed as seen below.
1) Hydro unit/Hydro unit HT error
f The address of Error, "Ai" and the error code will be displayed alternately on the remote controller display.
f
14