Table of Contents
Advertisement
Wired Remote Controller Installation
Wired Remote Controller Installation
Initializing Your Wired Remote Controller Communication
Wired remote controller must be initialized if installation status changes.
•
Changing number of indoor unit or their address
1
Press the
and
•
Your Wired Remote Controller will be initialized, and the device will search for the indoor units connected to
your Wired Remote Controller again.
Errors displayed on the Wired Remote Controller
Error codes for the Wired Remote Controller and the product connected to your Wired Remote Controller will be
displayed in the LCD display.
Wired Remote Controller error codes
Display
Communication error between remote controller and the Hydro unit/Hydro unit HT
Communication error between main and sub remote controller
Tracking error between remote controller and the Hydro unit/Hydro unit HT
Error due to exceeding maximum numbers of Hydro unit installation (16 units)
Error caused by installing mixed models
Remote controller's temperature sensor is disconnected or has problem
Data error on remote controller (Memory read/write error)
14 English
DB68-12533A-00_IM_EHS Wired Remote_CV_Book_EN_.indd 14
buttons at the same time for more than 5 seconds.
Contents
2023-08-07 오후 2:12:31
Advertisement
Table of Contents
