Connecting 2 Or More Wired Remote Controller - Samsung MWR-WW00N Installation Manual

Connecting 2 or more wired remote controller

Outdoor unit
COM1(F1, F2)
Unit No. 1
Wired remote
controller
ex)
Unit No.
1
2
3
• If the hydro unit/ hydro unit HT needs to share the temperature value of the hot water tank, it must be
connected to the same remote controller that is connected to other hydro unit/ hydro unit HT that is connected
CAUTION
directly to the hot water tank with a temperature sensor. Also, when there are more than 2 wired remote
controllers, they should be connected to same communication line.
• When multiple units (hydro unit/hydro unit HT) are connected to one wired remote controller, type of the units
must be same.
- Different types of units (hydro unit/ hydro unit HT) should not be connected to the same wire remote
controller
Hot water tank sensor
Hydro
unit/
Hydro
unit HT
Water tank sensor cable wiring
Hot water tank
COM1(F1, F2)
Hydro
unit/
Unit No. 2
Hydro
unit HT
COM2(F3, F4)
Wired remote
controller
Connected
Connected
Not connected
COM1(F1, F2)
Hydro
unit/
Unit No. 3
Hydro
unit HT
COM2(F3, F4)
05 Series install option SEG24 setting
0
0
1
13