Operating Mode - Symcode R50 User Manual

Operating Mode

In normal mode, the scans are uploaded directly to computer via USB cable or
wireless dongle. If succeeds, barcode scannner will make a low-frequency short
tone. If it fails, there willl be three low frequency short tones to alarm.
In normal mode, if fails, the data will be lost.You can scan below:
If the transfer range is beyond 2.4G wireless transfer range storage mode
is suggested, in which scans are stored in internal cache after being scanned.
In storage mode, if a barcode is scanned and the scanner will make a short
tone and scans are automatically stored in scanner's internal storage.
If the internal storage is full, the scanner will emit three low-frequency short
tones to alarm.
By scan "Total amount of stored barcode" setup barcode, to check the total
amount of scanned barcodes in storage:
Wireless Scanning and Payment All-in-One Device
normal mode
Storage Mode
Total amount of stored barcode
17