Reset Configuration To Defaults&Version Information; Pair With Bluetooth - Symcode R50 User Manual

Reset Configuration to Defaults&Version Information
During usage,if you scan other setup barcode by mistake and the scanning
cannot perform as normal way, you can scan the initialization setup barcode
to revert.
Bluetooth Pairing：
Pair with PC terminals or other devices （ including Android、
ios、 win systems) with bluetooth：
A: Start the scanner and long press for 8 seconds or scan "Bluetooth HID
Pairing Mode" to enter the pairing state. （blue light flicker） .
B: Turn on Bluetooth in the device to detect bluetooth device named with
"Barcode Scanner HID". Click "Barcode Scanner HID" to enter pairing status.
If pair successfully, you will hear a beep.(blue light is always on)
Note: When the scanner enters the state of matching and it does not pair
with bluetooth successfully within 1 minute, there is 2 times long low
sound indicated failing match and return to scanning mode.
（Or trigger twice to revert to scanning mode）
Wireless Scanning and Payment All-in-One Device
Reset Configuration to Defaults
Display Version Information
Electric Quantity Display
Bluetooth HID Pairing Mode
9