Yamaha AL125FC 2012 Owner's Manual page 69

5. Insert a new bulb into the socket
by pushing it in and turn it clock-
wise until it stops.
NOTICE
<CAU>
If a taillight bulb of different wattage
than recommended is used, it may
cause the battery to discharge or af-
fect the taillight lighting.
<ELB>
6. Install the bulb socket (together
with the bulb) by turning it clock-
wise.
7. Install the panel and close the
seat.
Rear turn signal light bulb
1. Open the seat. (See page 4-9.)
2. Remove the rear panel by remov-
ing the screws, and then pulling
the panel outward.
3. Remove the bulb socket (together
with the bulb) by turning it coun-
terclockwise.
PERIODIC MAINTENANCE AND ADJUSTMENT
ECAU0090
ZAUU0658
1. Rear turn signal light bulb socket
4. Remove the burnt-out bulb from
the socket by pulling it out.
ZAUU0659
1. Rear turn signal light bulb
5. Insert a new bulb into the socket.
NOTICE
1
<CAU>
If a turn signal light bulb of different
wattage than recommended is used,
the turn signal light flashing may be
affected.
<ELB>
6. Install the bulb socket (together
7. Install the rear panel, and then
1
7-32
with the bulb) by turning it clock-
wise.
close the seat.
ECAU0080
7