Yamaha AL125FC 2012 Owner's Manual page 67

A. Do not touch the glass part of the bulb
1. Place the motorcycle on the cen-
terstand.
2. Remove panel A and cowling A.
(See page 7-8, 7-7)
1
ZAUU0948
1. Panel A
2. Cowling A
PERIODIC MAINTENANCE AND ADJUSTMENT
3. Remove the headlight bulb cover
by pulling it off.
ZAUU0949
1. Headlight bulb cover (× 1)
4. Remove the headlight bulb sock-
et by pushing it inward and turn-
ing it counterclockwise, and then
remove the burnt-out bulb.
2
1
ZAUU0950
1. Headlight bulb socket (× 1)
5. Place a new bulb into position,
1
NOTICE
_
If a headlight bulb of different watt-
age than recommended is used, it
may cause the battery to discharge
or affect the headlight lighting.
_
6. Install the panel and cowling.
7. Have a Yamaha dealer adjust the
Front turn signal light bulb
1. Place the motorcycle on the cen-
2. Remove panel A and cowling A.
3. Remove the socket (together with
7-30
and then secure it with the bulb
socket.
headlight beam if necessary.
terstand.
(See page 7-8, 7-7.)
the bulb) by turning it counter-
clockwise.
ECAU0070
7