Table of Contents
Advertisement
Introduction to this manual
What this chapter contains
This chapter describes RBIP-01 BACnet/IP Router Module User's Manual.
Intended audience
The manual is intended for the people who are responsible for commissioning and
using an RBIP-01 BACnet/IP Router Module. The reader is expected to have basic
knowledge of electrical fundamentals, Building Automation and Control networks
(BACnet), electrical wiring practices and operating the drive.
Before you start
It is assumed that the drive is installed and ready to operate before starting the
installation of the module. Detailed installation instructions of the module are given in
RBIP-01 BACnet/IP Router Module Installation Manual (3AUA0000040168 Rev A
[English]).
In addition to conventional installation tools, have the drive manuals available during
the installation and commissioning as they contain important information not
included in this manual. The drive manuals are referred to at various points of this
document.
What this manual contains
This manual contains information on the configuration and use of the RBIP-01
BACnet/IP Router Module.
Safety instructions
Introduction to this manual
Overview
description of the RBIP-01 BACnet/IP Router Module.
Quick start-up guide
Router Module settings.
Working with the web server
server and how to login and logout, gives general setting instructions and lists the
user right levels.
User interface
use.
Fault tracing
BACnet Protocol Implementation Conformance Statement (PICS)
the end of the document.
are featured in the first few pages of this manual.
contains a short description of the manual.
gives basic information on BACnet routing and contains a short
gives short instructions on configuring the RBIP-01 BACnet/IP
describes the user interface menus of the router module and their
lists the LED indications and their meaning.
describes how to connect to the router module's web
is attached to
Introduction to this manual
9
Advertisement
Table of Contents
