Operation; Fill Clear Water Tank; Operate - Fakir Starky WDA 700 Wet & Dry User Manual

Fill clear water tank

Operate

36

Operation

Press the release button on the clear water tank to
remove it. Open the lid, fill the container with warm
water (max. 60 ° C / 140 ° F), add cleaning agent if
necessary and close the lid tightly. Put the fresh water
tank back into place until you hear the clicking sound.
Note!
Always ensure that all the filters are inserted before
you use the vacuum cleaner.
Press the "ON" button to start the machine.
Press the "Spot" button to remove tough spots and
stains with higher speed and stronger spray.
Indicator light:
Normal - lights up blue.
Spotmodus - flashes blue.
Squeeze the solution trigger when moving backward
to spray liquid as needed.
Overlap strokes by one inch to help prevent streaking,
it will pick up dirty water during cleaning.
You can also use the vacuum cleaner without the
spray function, for example to vacuum up leaking
liquids.
Do not recline the appliance more than 144° to avoid
water leakage.
You can also vacuum dry, just leave the water tanks
empty.
Attention!
Do not use for absorbing foam liquid.